FAG QJ1040-N2-MPA bearings | Dimensions: 200x310x51mm
Also known as : QJ1040-N2-MPA
- Inside Diameter: 200 mm
- Outside Diameter: 310 mm
- Width: 51 mm
- Basic dynamic load rating: 390 kN
- Basic static load rating: 620 kN
FAG QJ1040-N2-MPA Bearing details
| Number | QJ1040-N2-MPA | |
|---|---|---|
| Type |
Four point contact bearings main dimensions to DIN 628-4, can be dismantled, with split inner ring, with two retaining slots |
|
| d | 200mm | |
| D | 310mm | |
| B | 51mm | |
| 45° | Groove angle | |
| a | 179mm | |
| an | 12,7mm | |
| bn | 10,5mm | |
| D1 | 271,5mm | |
| Da max | 299,8mm | |
| d1 | 238,9mm | |
| da min | 210,2mm | |
| ra max | 2,1mm | |
| rmin | 2,1mm | |
| rn | 2mm | |
| α | 35° | Contact angle |
| m | 15kg | Mass |
| Cr | 390000N | Basic dynamic load rating, radial |
| C0r | 620000N | Basic static load rating, radial |
| Cur | 22000N | Fatigue limit load, radial |
| nG | 36001/min | Limiting speed |
| nϑr | 18901/min | Reference speed |
Nodes bearings have FAG QJ1040-N2-MPA bearings in stock, FAG bearings, main dimensions to DIN 628-4, can be dismantled, with split inner ring, with two retaining slots.
FAG QJ1040-N2-MPA bearing cross reference
NSK QJ1040 bearing
200mm x 310mm x 51mm
FAG B7040-C-T-P4S bearing
200mm x 310mm x 51mm
FAG B71940-C-T-P4S bearing
200mm x 280mm x 38mm
FAG B7240-C-T-P4S bearing
200mm x 360mm x 58mm
FAG B7040-E-T-P4S bearing
200mm x 310mm x 51mm
FAG B71940-E-T-P4S bearing
200mm x 280mm x 38mm