FAG QJ1240-N2-MPA bearings | Dimensions: 200x360x70mm
Also known as : QJ1240-N2-MPA
- Inside Diameter: 200 mm
- Outside Diameter: 360 mm
- Width: 70 mm
- Basic dynamic load rating: 520 kN
- Basic static load rating: 860 kN
FAG QJ1240-N2-MPA Bearing details
| Number | QJ1240-N2-MPA | |
|---|---|---|
| Type |
Four point contact bearings main dimensions to DIN 628-4, can be dismantled, with split inner ring, with two retaining slots |
|
| d | 200mm | |
| D | 360mm | |
| B | 70mm | |
| 45° | Groove angle | |
| a | 560mm | |
| an | 12,7mm | |
| bn | 10,5mm | |
| D1 | 303,5mm | |
| Da max | 343mm | |
| d1 | 259,1mm | |
| da min | 217mm | |
| ra max | 3mm | |
| rmin | 4mm | |
| rn | 2mm | |
| α | 45° | Contact angle |
| m | 32kg | Mass |
| Cr | 520000N | Basic dynamic load rating, radial |
| C0r | 860000N | Basic static load rating, radial |
| Cur | 29000N | Fatigue limit load, radial |
| nG | 32001/min | Limiting speed |
| nϑr | 17701/min | Reference speed |
Nodes bearings have FAG QJ1240-N2-MPA bearings in stock, FAG bearings, main dimensions to DIN 628-4, can be dismantled, with split inner ring, with two retaining slots.
FAG QJ1240-N2-MPA bearing cross reference
FAG B7040-C-T-P4S bearing
200mm x 310mm x 51mm
FAG B71940-C-T-P4S bearing
200mm x 280mm x 38mm
FAG B7240-C-T-P4S bearing
200mm x 360mm x 58mm
FAG B7040-E-T-P4S bearing
200mm x 310mm x 51mm
FAG B71940-E-T-P4S bearing
200mm x 280mm x 38mm
FAG B7240-E-T-P4S bearing
200mm x 360mm x 58mm
FAG QJ240-N2-MPA bearing
200mm x 360mm x 58mm
FAG QJ340-N2-MPA bearing
200mm x 420mm x 80mm