FAG QJ219-N2-MPA bearings | Dimensions: 95x170x32mm
Also known as : QJ219-N2-MPA
- Inside Diameter: 95 mm
- Outside Diameter: 170 mm
- Width: 32 mm
- Basic dynamic load rating: 190 kN
- Basic static load rating: 212 kN
FAG QJ219-N2-MPA Bearing
FAG QJ219-N2-MPA Bearing details
| Number | QJ219-N2-MPA | |
|---|---|---|
| Type |
Four point contact bearings main dimensions to DIN 628-4, can be dismantled, with split inner ring, with two retaining slots |
|
| d | 95mm | |
| D | 170mm | |
| B | 32mm | |
| 45° | Groove angle | |
| a | 93mm | |
| an | 8,1mm | |
| bn | 6,5mm | |
| D1 | 144,4mm | |
| Da max | 158mm | |
| d1 | 121mm | |
| da min | 107mm | |
| ra max | 2,1mm | |
| rmin | 2,1mm | |
| rn | 1mm | |
| α | 35° | Contact angle |
| m | 3,41kg | Mass |
| Cr | 190000N | Basic dynamic load rating, radial |
| C0r | 212000N | Basic static load rating, radial |
| Cur | 10400N | Fatigue limit load, radial |
| nG | 70001/min | Limiting speed |
| nϑr | 37001/min | Reference speed |
Nodes bearings have FAG QJ219-N2-MPA bearings in stock, FAG bearings, main dimensions to DIN 628-4, can be dismantled, with split inner ring, with two retaining slots.
FAG QJ219-N2-MPA bearing cross reference
FAG 7219-B-XL-MP bearing
95mm x 170mm x 32mm
FAG 7219-B-XL-TVP bearing
95mm x 170mm x 32mm
FAG 7319-B-XL-JP bearing
95mm x 200mm x 45mm
FAG 7319-B-XL-MP bearing
95mm x 200mm x 45mm
FAG 7319-B-XL-TVP bearing
95mm x 200mm x 45mm
NSK QJ219 bearing
95mm x 170mm x 32mm
FAG B7019-C-T-P4S bearing
95mm x 145mm x 24mm
FAG B71919-C-T-P4S bearing
95mm x 130mm x 18mm
FAG B7219-C-T-P4S bearing
95mm x 170mm x 32mm
FAG B7019-E-T-P4S bearing
95mm x 145mm x 24mm
FAG B71919-E-T-P4S bearing
95mm x 130mm x 18mm