FAG QJ344-N2-MPA bearings | Dimensions: 220x460x88mm
Also known as : QJ344-N2-MPA
- Inside Diameter: 220 mm
- Outside Diameter: 460 mm
- Width: 88 mm
- Basic dynamic load rating: 900 kN
- Basic static load rating: 1650 kN
FAG QJ344-N2-MPA Bearing
FAG QJ344-N2-MPA Bearing details
| Number | QJ344-N2-MPA | |
|---|---|---|
| Type |
Four point contact bearings main dimensions to DIN 628-4, can be dismantled, with split inner ring, with two retaining slots |
|
| d | 220mm | |
| D | 460mm | |
| B | 88mm | |
| 45° | Groove angle | |
| a | 238mm | |
| an | 15mm | |
| bn | 12,5mm | |
| D1 | 378mm | |
| Da max | 440mm | |
| d1 | 302mm | |
| da min | 240mm | |
| ra max | 4mm | |
| rmin | 5mm | |
| rn | 2,5mm | |
| α | 35° | Contact angle |
| m | 77,1kg | Mass |
| Cr | 900000N | Basic dynamic load rating, radial |
| C0r | 1650000N | Basic static load rating, radial |
| Cur | 51000N | Fatigue limit load, radial |
| nG | 24301/min | Limiting speed |
| nϑr | 10801/min | Reference speed |
Nodes bearings have FAG QJ344-N2-MPA bearings in stock, FAG bearings, main dimensions to DIN 628-4, can be dismantled, with split inner ring, with two retaining slots.
FAG QJ344-N2-MPA bearing cross reference
FAG B7044-C-T-P4S bearing
220mm x 340mm x 56mm
FAG B71944-C-T-P4S bearing
220mm x 300mm x 38mm
FAG B7244-C-T-P4S bearing
220mm x 400mm x 65mm
FAG B7044-E-T-P4S bearing
220mm x 340mm x 56mm
FAG B71944-E-T-P4S bearing
220mm x 300mm x 38mm
FAG B7244-E-T-P4S bearing
220mm x 400mm x 65mm
FAG QJ244-N2-MPA bearing
220mm x 400mm x 65mm
FAG QJ1044-N2-MPA bearing
220mm x 340mm x 56mm