FAG QJ348-N2-MPA bearings | Dimensions: 240x500x95mm
Also known as : QJ348-N2-MPA
- Inside Diameter: 240 mm
- Outside Diameter: 500 mm
- Width: 95 mm
- Basic dynamic load rating: 1030 kN
- Basic static load rating: 1980 kN
FAG QJ348-N2-MPA Bearing
FAG QJ348-N2-MPA Bearing details
| Number | QJ348-N2-MPA | |
|---|---|---|
| Type |
Four point contact bearings main dimensions to DIN 628-4, can be dismantled, with split inner ring, with two retaining slots |
|
| d | 240mm | |
| D | 500mm | |
| B | 95mm | |
| 45° | Groove angle | |
| a | 259mm | |
| an | 15mm | |
| bn | 12,5mm | |
| D1 | 410mm | |
| Da max | 480mm | |
| d1 | 330,7mm | |
| da min | 260mm | |
| ra max | 4mm | |
| rmin | 5mm | |
| rn | 2,5mm | |
| α | 35° | Contact angle |
| m | 98,2kg | Mass |
| Cr | 1030000N | Basic dynamic load rating, radial |
| C0r | 1980000N | Basic static load rating, radial |
| Cur | 54000N | Fatigue limit load, radial |
| nG | 22201/min | Limiting speed |
| nϑr | 9501/min | Reference speed |
Nodes bearings have FAG QJ348-N2-MPA bearings in stock, FAG bearings, main dimensions to DIN 628-4, can be dismantled, with split inner ring, with two retaining slots.
FAG QJ348-N2-MPA bearing cross reference
FAG B7048-C-T-P4S bearing
240mm x 360mm x 56mm
FAG B71948-C-T-P4S bearing
240mm x 320mm x 38mm
FAG B7048-E-T-P4S bearing
240mm x 360mm x 56mm
FAG B71948-E-T-P4S bearing
240mm x 320mm x 38mm
FAG QJ248-N2-MPA bearing
240mm x 440mm x 72mm
FAG QJ1048-N2-MPA bearing
240mm x 360mm x 56mm