FAG 53324-MP+U324 thrust bearings | Dimensions: 120x220x80mm
Also known as : 53324-MP+U324
- Inside Diameter: 120 mm
- Outside Diameter: 220 mm
- Width: 80 mm
- Basic dynamic load rating: 325 kN
- Basic static load rating: 910 kN
FAG 53324-MP+U324 Bearing
FAG 53324-MP+U324 Bearing details
Number | 53324-MP+U324 | |
---|---|---|
Type |
Axial deep groove ball bearings main dimensions to DIN 711/ISO 104, single direction, with spherical housing locating washer and seating washer, separable |
|
d | 120mm | |
D3 | 220mm | |
T1 | 80mm | |
A | 63mm | |
C | 22mm | |
D | 210mm | |
D1 | 123mm | |
D2 | 165mm | |
Da max | 165mm | |
d1 | 205mm | |
da min | 174mm | |
R | 160mm | |
ra max | 2,1mm | |
rmin | 2,1mm | |
T | 74,1mm | |
U324 | Designation, seating washer | |
m | 10,6kg | Mass |
m1 | 2,01kg | Mass, seating washer |
Ca | 325000N | Basic dynamic load rating, axial |
C0a | 910000N | Basic static load rating, axial |
Cua | 32500N | Fatigue limit load, axial |
nG | 16101/min | Limiting speed |
nϑr | 32001/min | Reference speed |
A | 4,4 | Minimum load factor |
Nodes bearings have FAG 53324-MP+U324 bearings in stock. 53324-MP+U324, Axial deep groove ball bearings, main dimensions to DIN 711/ISO 104, single direction, with spherical housing locating washer and seating washer, separable.