FAG B7030-C-T-P4S spindle bearings | 150x225x35mm
Also known as : B7030-C-T-P4S
- Inside Diameter: 150 mm
- Outside Diameter: 225 mm
- Width: 35 mm
- Basic dynamic load rating: 187 kN
- Basic static load rating: 137 kN
FAG B7030-C-T-P4S Bearing
FAG B7030-C-T-P4S Bearing details
| Number | B7030-C-T-P4S | |
|---|---|---|
| Type | FAG spindle bearings, adjusted, in pairs or sets | |
| d | 150 mm | |
| D | 225 mm | |
| B | 35 mm | |
| a | 42,6 mm | |
| Da | 213 mm | Tolerance: H12 |
| da | 163 mm | Tolerance: h12 |
| Etk max | 181 mm | |
| Etk min | 172,2 mm | |
| Etk1 max | 181 mm | |
| Etk1 min | 172,2 mm | |
| r1 min | 2,1 mm | |
| ra max | 2,1 mm | |
| ra1 max | 1 mm | |
| rmin | 2,1 mm | |
| α | 15 ° | Contact angle |
| m | 4,04 kg | ≈ Mass |
| Cr | 187000 N | Basic dynamic load rating, radial |
| C0r | 137000 N | Basic static load rating, radial |
| Cur | 10300 N | Fatigue limit load, radial |
| nG Fett | 6000 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
| nG Öl | 9000 1/min | Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
| FV L | 1104 N | Preload force |
| FV M | 3443 N | Preload force |
| FV H | 6843 N | Preload force |
| KaE L | 3394 N | Lift-off force |
| KaE M | 11397 N | Lift-off force |
| KaE H | 24140 N | Lift-off force |
| ca L | 156 N/µm | Axial rigidity |
| ca M | 260 N/µm | Axial rigidity |
| ca H | 367 N/µm | Axial rigidity |
Nodes bearings have FAG B7030-C-T-P4S spindle bearings in stock, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.
FAG B7030-C-T-P4S bearing cross reference
FAG B71930-C-T-P4S bearing
150mm x 210mm x 28mm
FAG B7230-C-T-P4S bearing
150mm x 270mm x 45mm
FAG B7030-E-T-P4S bearing
150mm x 225mm x 35mm
FAG B71930-E-T-P4S bearing
150mm x 210mm x 28mm