FAG B71934-C-T-P4S spindle bearings | 170x230x28mm
Also known as : B71934-C-T-P4S
- Inside Diameter: 170 mm
- Outside Diameter: 230 mm
- Width: 28 mm
- Basic dynamic load rating: 133 kN
- Basic static load rating: 115 kN
FAG B71934-C-T-P4S Bearing
FAG B71934-C-T-P4S Bearing details
| Number | B71934-C-T-P4S | |
|---|---|---|
| Type | FAG spindle bearings, adjusted, in pairs or sets | |
| d | 170 mm | |
| D | 230 mm | |
| B | 28 mm | |
| a | 40,8 mm | |
| Da | 219 mm | Tolerance: H12 |
| da | 180 mm | Tolerance: h12 |
| Etk max | 194,7 mm | |
| Etk min | 188,6 mm | |
| Etk1 max | 194,7 mm | |
| Etk1 min | 188,6 mm | |
| r1 min | 1 mm | |
| ra max | 1 mm | |
| ra1 max | 1 mm | |
| rmin | 2 mm | |
| α | 15 ° | Contact angle |
| m | 2,79 kg | ≈ Mass |
| Cr | 133000 N | Basic dynamic load rating, radial |
| C0r | 115000 N | Basic static load rating, radial |
| Cur | 8300 N | Fatigue limit load, radial |
| nG Fett | 5600 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
| nG Öl | 8500 1/min | Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
| FV L | 742 N | Preload force |
| FV M | 2375 N | Preload force |
| FV H | 4770 N | Preload force |
| KaE L | 2266 N | Lift-off force |
| KaE M | 7779 N | Lift-off force |
| KaE H | 16624 N | Lift-off force |
| ca L | 154 N/µm | Axial rigidity |
| ca M | 256 N/µm | Axial rigidity |
| ca H | 362 N/µm | Axial rigidity |
Nodes bearings have FAG B71934-C-T-P4S spindle bearings in stock, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.
FAG B71934-C-T-P4S bearing cross reference
FAG B7034-C-T-P4S bearing
170mm x 260mm x 42mm
FAG B7234-C-T-P4S bearing
170mm x 310mm x 52mm
FAG B7034-E-T-P4S bearing
170mm x 260mm x 42mm
FAG B71934-E-T-P4S bearing
170mm x 230mm x 28mm