FAG B71938-C-T-P4S spindle bearings | 190x260x33mm
Also known as : B71938-C-T-P4S
- Inside Diameter: 190 mm
- Outside Diameter: 260 mm
- Width: 33 mm
- Basic dynamic load rating: 174 kN
- Basic static load rating: 152 kN
FAG B71938-C-T-P4S Bearing
FAG B71938-C-T-P4S Bearing details
| Number | B71938-C-T-P4S | |
|---|---|---|
| Type | FAG spindle bearings, adjusted, in pairs or sets | |
| d | 190 mm | |
| D | 260 mm | |
| B | 33 mm | |
| a | 46,6 mm | |
| Da | 247 mm | Tolerance: H12 |
| da | 202 mm | Tolerance: h12 |
| Etk max | 218,9 mm | |
| Etk min | 211,6 mm | |
| Etk1 max | 218,9 mm | |
| Etk1 min | 211,6 mm | |
| r1 min | 1 mm | |
| ra max | 1 mm | |
| ra1 max | 1 mm | |
| rmin | 2 mm | |
| α | 15 ° | Contact angle |
| m | 4,33 kg | ≈ Mass |
| Cr | 174000 N | Basic dynamic load rating, radial |
| C0r | 152000 N | Basic static load rating, radial |
| Cur | 10400 N | Fatigue limit load, radial |
| nG Fett | 5000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
| nG Öl | 7500 1/min |
Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
| FV L | 888 N | Preload force |
| FV M | 2947 N | Preload force |
| FV H | 5992 N | Preload force |
| KaE L | 2700 N | Lift-off force |
| KaE M | 9612 N | Lift-off force |
| KaE H | 20790 N | Lift-off force |
| ca L | 166 N/µm | Axial rigidity |
| ca M | 281 N/µm | Axial rigidity |
| ca H | 398 N/µm | Axial rigidity |
Nodes bearings have FAG B71938-C-T-P4S spindle bearings in stock, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.
FAG B71938-C-T-P4S bearing cross reference
FAG B7038-C-T-P4S bearing
190mm x 290mm x 46mm
FAG B7238-C-T-P4S bearing
190mm x 340mm x 55mm
FAG B7038-E-T-P4S bearing
190mm x 290mm x 46mm
FAG B71938-E-T-P4S bearing
190mm x 260mm x 33mm