FAG HS7000-C-T-P4S Bearing

FAG HS7000-C-T-P4S spindle bearings | 10x26x8mm

Also known as : HS7000-C-T-P4S

• Inside Diameter: 10 mm
• Outside Diameter: 26 mm
• Width: 8 mm
• Basic dynamic load rating: 2.47 kN
• Basic static load rating: 0.94 kN

Inquire Now

FAG HS7000-C-T-P4S Bearing

Number	HS7000-C-T-P4S
Type	FAG spindle bearings adjusted, in pairs or sets, contact angle a = 15°, restricted tolerances
d	10 mm
D	26 mm
B	8 mm
a	6,4 mm
Da	22 mm	Tolerance: H12
da	14 mm	Tolerance: h12
Etk max	16,9 mm
Etk min	16,4 mm
Etk1 max	16,9 mm
Etk1 min	15,3 mm
r1 min	0,3 mm
ra max	0,3 mm
ra1 max	0,1 mm
rmin	0,3 mm
α	15 °	Contact angle
m	0,021 kg	≈ Mass
Cr	2470 N	Basic dynamic load rating, radial
C0r	940 N	Basic static load rating, radial
Cur	97 N	Fatigue limit load, radial
nG Fett	90000 1/min	Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings.
nG Öl	140000 1/min	Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings.
FV L	9 N	Preload force
FV M	28 N	Preload force
FV H	55 N	Preload force
KaE L	28 N	Lift-off force
KaE M	89 N	Lift-off force
KaE H	185 N	Lift-off force
ca L	10,9 N/µm	Axial rigidity
ca M	17,4 N/µm	Axial rigidity
ca H	24,1 N/µm	Axial rigidity

Nodes bearings have FAG HS7000-C-T-P4S spindle bearings in stock, FAG bearings, precision spindle bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.