FAG HS7004-C-T-P4S spindle bearings | 20x42x12mm
Also known as : HS7004-C-T-P4S
- Inside Diameter: 20 mm
- Outside Diameter: 42 mm
- Width: 12 mm
- Basic dynamic load rating: 5.7 kN
- Basic static load rating: 2.7 kN
FAG HS7004-C-T-P4S Bearing
FAG HS7004-C-T-P4S Bearing details
Number | HS7004-C-T-P4S | |
---|---|---|
Type | FAG spindle bearings adjusted, in pairs or sets, contact angle a = 15°, restricted tolerances | |
d | 20 mm | |
D | 42 mm | |
B | 12 mm | |
a | 10,2 mm | |
Da | 37 mm | Tolerance: H12 |
da | 25 mm | Tolerance: h12 |
Etk max | 29,7 mm | |
Etk min | 28,6 mm | |
Etk1 max | 29,7 mm | |
Etk1 min | 27,1 mm | |
r1 min | 0,6 mm | |
ra max | 0,6 mm | |
ra1 max | 0,3 mm | |
rmin | 0,6 mm | |
α | 15 ° | Contact angle |
m | 0,077 kg | ≈ Mass |
Cr | 5700 N | Basic dynamic load rating, radial |
C0r | 2700 N | Basic static load rating, radial |
Cur | 280 N | Fatigue limit load, radial |
nG Fett | 53000 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
nG Öl | 80000 1/min | Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 21 N | Preload force |
FV M | 62 N | Preload force |
FV H | 125 N | Preload force |
KaE L | 63 N | Lift-off force |
KaE M | 198 N | Lift-off force |
KaE H | 413 N | Lift-off force |
ca L | 19,8 N/µm | Axial rigidity |
ca M | 31,5 N/µm | Axial rigidity |
ca H | 43,5 N/µm | Axial rigidity |
Nodes bearings have FAG HS7004-C-T-P4S spindle bearings in stock, FAG bearings, precision spindle bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.