FAG HS7010-C-T-P4S Bearing

FAG HS7010-C-T-P4S spindle bearings | 50x80x16mm

Also known as : HS7010-C-T-P4S

• Inside Diameter: 50 mm
• Outside Diameter: 80 mm
• Width: 16 mm
• Basic dynamic load rating: 12.8 kN
• Basic static load rating: 8.2 kN

Inquire Now

FAG HS7010-C-T-P4S Bearing

Number	HS7010-C-T-P4S
Type	FAG spindle bearings adjusted, in pairs or sets, contact angle a = 15°, restricted tolerances
d	50 mm
D	80 mm
B	16 mm
a	16,7 mm
Da	74 mm	Tolerance: H12
da	56 mm	Tolerance: h12
Etk max	63 mm
Etk min	61,7 mm
Etk1 max	63 mm
Etk1 min	59,6 mm
r1 min	1 mm
ra max	1 mm
ra1 max	0,3 mm
rmin	1 mm
α	15 °	Contact angle
m	0,283 kg	≈ Mass
Cr	12800 N	Basic dynamic load rating, radial
C0r	8200 N	Basic static load rating, radial
Cur	840 N	Fatigue limit load, radial
nG Fett	24000 1/min	Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings.
nG Öl	38000 1/min	Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings.
FV L	45 N	Preload force
FV M	135 N	Preload force
FV H	269 N	Preload force
KaE L	135 N	Lift-off force
KaE M	424 N	Lift-off force
KaE H	884 N	Lift-off force
ca L	36,4 N/µm	Axial rigidity
ca M	57,4 N/µm	Axial rigidity
ca H	78,8 N/µm	Axial rigidity

Nodes bearings have FAG HS7010-C-T-P4S spindle bearings in stock, FAG bearings, precision spindle bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.