FAG HS7021-C-T-P4S spindle bearings | 105x160x26mm
Also known as : HS7021-C-T-P4S
- Inside Diameter: 105 mm
- Outside Diameter: 160 mm
- Width: 26 mm
- Basic dynamic load rating: 47.5 kN
- Basic static load rating: 36.5 kN
FAG HS7021-C-T-P4S Bearing
FAG HS7021-C-T-P4S Bearing details
Number | HS7021-C-T-P4S | |
---|---|---|
Type | FAG spindle bearings adjusted, in pairs or sets, contact angle a = 15°, restricted tolerances | |
d | 105 mm | |
D | 160 mm | |
B | 26 mm | |
a | 30,8 mm | |
Da | 150 mm | Tolerance: H12 |
da | 116 mm | Tolerance: h12 |
Etk max | 129 mm | |
Etk min | 125,8 mm | |
Etk1 max | 129 mm | |
Etk1 min | 121,7 mm | |
r1 min | 2 mm | |
ra max | 2 mm | |
ra1 max | 1 mm | |
rmin | 2 mm | |
α | 15 ° | Contact angle |
m | 1,7 kg | ≈ Mass |
Cr | 47500 N | Basic dynamic load rating, radial |
C0r | 36500 N | Basic static load rating, radial |
Cur | 3250 N | Fatigue limit load, radial |
nG Fett | 12000 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
nG Öl | 18000 1/min | Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 164 N | Preload force |
FV M | 492 N | Preload force |
FV H | 985 N | Preload force |
KaE L | 489 N | Lift-off force |
KaE M | 1536 N | Lift-off force |
KaE H | 3194 N | Lift-off force |
ca L | 75 N/µm | Axial rigidity |
ca M | 117 N/µm | Axial rigidity |
ca H | 160 N/µm | Axial rigidity |
Nodes bearings have FAG HS7021-C-T-P4S spindle bearings in stock, FAG bearings, precision spindle bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.