FAG HS7024-E-T-P4S spindle bearings | 120x180x28mm
Also known as : HS7024-E-T-P4S
- Inside Diameter: 120 mm
- Outside Diameter: 180 mm
- Width: 28 mm
- Basic dynamic load rating: 46.5 kN
- Basic static load rating: 38.5 kN
FAG HS7024-E-T-P4S Bearing
FAG HS7024-E-T-P4S Bearing details
Number | HS7024-E-T-P4S | |
---|---|---|
Type | FAG spindle bearings adjusted, in pairs or sets, contact angle a = 25°, restricted tolerances | |
d | 120 mm | |
D | 180 mm | |
B | 28 mm | |
a | 49 mm | |
Da | 169 mm | Tolerance: H12 |
da | 131 mm | Tolerance: h12 |
Etk max | 146,4 mm | |
Etk min | 143,3 mm | |
Etk1 max | 146,4 mm | |
Etk1 min | 139,2 mm | |
r1 min | 2 mm | |
ra max | 2 mm | |
ra1 max | 1 mm | |
rmin | 2 mm | |
α | 25 ° | Contact angle |
m | 2,32 kg | ≈ Mass |
Cr | 46500 N | Basic dynamic load rating, radial |
C0r | 38500 N | Basic static load rating, radial |
Cur | 3200 N | Fatigue limit load, radial |
nG Fett | 9500 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
nG Öl | 14000 1/min | Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 276 N | Preload force |
FV M | 828 N | Preload force |
FV H | 1656 N | Preload force |
KaE L | 795 N | Lift-off force |
KaE M | 2426 N | Lift-off force |
KaE H | 4942 N | Lift-off force |
ca L | 203 N/µm | Axial rigidity |
ca M | 302 N/µm | Axial rigidity |
ca H | 392 N/µm | Axial rigidity |
Nodes bearings have FAG HS7024-E-T-P4S spindle bearings in stock, FAG bearings, precision spindle bearings, adjusted, in pairs or sets, contact angle α = 25°, restricted tolerances.