FAG HS71919-C-T-P4S Bearing

FAG HS71919-C-T-P4S spindle bearings | 95x130x18mm

Also known as : HS71919-C-T-P4S

• Inside Diameter: 95 mm
• Outside Diameter: 130 mm
• Width: 18 mm
• Basic dynamic load rating: 23.9 kN
• Basic static load rating: 19.9 kN

Inquire Now

FAG HS71919-C-T-P4S Bearing

Number	HS71919-C-T-P4S
Type	FAG spindle bearings adjusted, in pairs or sets, contact angle a = 15°, restricted tolerances
d	95 mm
D	130 mm
B	18 mm
a	24,1 mm
Da	124 mm	Tolerance: H12
da	102 mm	Tolerance: h12
Etk max	109,7 mm
Etk min	108,2 mm
Etk1 max	109,7 mm
Etk1 min	105,6 mm
r1 min	1,1 mm
ra max	0,6 mm
ra1 max	0,6 mm
rmin	1,1 mm
α	15 °	Contact angle
m	0,606 kg	≈ Mass
Cr	23900 N	Basic dynamic load rating, radial
C0r	19900 N	Basic static load rating, radial
Cur	1930 N	Fatigue limit load, radial
nG Fett	14000 1/min	Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings.
nG Öl	22000 1/min	Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings.
FV L	82 N	Preload force
FV M	246 N	Preload force
FV H	492 N	Preload force
KaE L	244 N	Lift-off force
KaE M	766 N	Lift-off force
KaE H	1593 N	Lift-off force
ca L	60 N/µm	Axial rigidity
ca M	93,7 N/µm	Axial rigidity
ca H	127 N/µm	Axial rigidity

Nodes bearings have FAG HS71919-C-T-P4S spindle bearings in stock, FAG bearings, precision spindle bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.