FAG HSS71921-E-T-P4S spindle bearings | 105x145x20mm
Also known as : HSS71921-E-T-P4S
- Inside Diameter: 105 mm
- Outside Diameter: 145 mm
- Width: 20 mm
- Basic dynamic load rating: 27.5 kN
- Basic static load rating: 23.4 kN
FAG HSS71921-E-T-P4S Bearing
FAG HSS71921-E-T-P4S Bearing details
| Number | HSS71921-E-T-P4S | |
|---|---|---|
| Type | FAG spindle bearings adjusted, in pairs or sets, contact angle a = 25°, lip seals on both sides, non-contact, restricted tolerances | |
| d | 105 mm | |
| D | 145 mm | |
| B | 20 mm | |
| a | 39,1 mm | |
| Da | 138 mm | Tolerance: H12 |
| da | 112 mm | Tolerance: h12 |
| r1 min | 1,1 mm | |
| ra max | 0,6 mm | |
| ra1 max | 0,6 mm | |
| rmin | 1,1 mm | |
| α | 25 ° | Contact angle |
| m | 0,98 kg | ≈ Mass |
| Cr | 27500 N | Basic dynamic load rating, radial |
| C0r | 23400 N | Basic static load rating, radial |
| Cur | 2150 N | Fatigue limit load, radial |
| nG Fett | 11000 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
| FV L | 161 N | Preload force |
| FV M | 483 N | Preload force |
| FV H | 966 N | Preload force |
| KaE L | 463 N | Lift-off force |
| KaE M | 1414 N | Lift-off force |
| KaE H | 2880 N | Lift-off force |
| ca L | 170 N/µm | Axial rigidity |
| ca M | 252 N/µm | Axial rigidity |
| ca H | 327 N/µm | Axial rigidity |
Nodes bearings have FAG HSS71921-E-T-P4S spindle bearings in stock, FAG bearings, precision spindle bearings, adjusted, in pairs or sets, contact angle α = 25°, lip seals on both sides, non-contact, restricted tolerances.
FAG HSS71921-E-T-P4S bearing cross reference
NSK 7921C bearing
105mm x 145mm x 20mm
NSK 7921CDB bearing
105mm x 145mm x 20mm
NSK 7921CDF bearing
105mm x 145mm x 20mm
NSK 7921A5DT bearing
105mm x 145mm x 20mm
NSK 7921CDT bearing
105mm x 145mm x 20mm
FAG B7021-C-T-P4S bearing
105mm x 160mm x 26mm
FAG B71921-C-T-P4S bearing
105mm x 145mm x 20mm
FAG B7221-C-T-P4S bearing
105mm x 190mm x 36mm
FAG B7021-E-T-P4S bearing
105mm x 160mm x 26mm
FAG B71921-E-T-P4S bearing
105mm x 145mm x 20mm
FAG B7221-E-T-P4S bearing
105mm x 190mm x 36mm