FAG KHM88542-HM88510 tapered roller bearings
Also known as : KHM88542-HM88510,
- Inside Diameter: 31.75 mm
- Outside Diameter: 73.025 mm
- Width: 29.37 mm
- Basic dynamic load rating: 72 kN
- Basic static load rating: 97 kN
FAG KHM88542-HM88510 Bearing
FAG KHM88542-HM88510 Bearing details
| model | KHM88542-HM88510 |
|---|---|
| d | 31.75 mm |
| D | 73.025 mm |
| T | 29.37 mm |
| a | 24 mm |
| B | 27.782 mm |
| C | 23.02 mm |
| Ca min | 4 mm |
| Cb min | 6 mm |
| Da min | 59 mm |
| Db min | 70 mm |
| d1 | 58 mm |
| da max | 42.6 mm |
| db min | 45.5 mm |
| r1,2 min | 1.3 mm |
| r3,4 min | 3.3 mm |
| ra max | 1.3 mm |
| rb max | 3.3 mm |
| Cr | 72000 N, Basic dynamic load rating, radial |
| C0r | 97000 N, Basic static load rating, radial |
| Limiting speed | 9900 1/min |
| Reference speed | 1/min |
| Cur | 12100 N, Fatigue limit load, radial |
| e | 0.55 |
| Y | 1.1 |
| Y0 | 0.6 |
| mass | 0.641 kg |
Nodes bearings have FAG KHM88542-HM88510 roller bearings in stock, more related FAG bearings: FAG tapered roller bearings catalogue, in inch sizes, separable, adjusted or in pairs.
FAG KHM88542-HM88510 bearing cross reference
TIMKEN HM88542-HM88510 bearing
31.750mm x 73.025mm x 29.370mm
FAG KLM67047-LM67010 bearing
31.75mm x 59.131mm x 15.875mm
FAG KLM67048-LM67010 bearing
31.75mm x 59.131mm x 15.875mm
FAG KLM67049-A-LM67010 bearing
31.75mm x 59.131mm x 15.875mm
FAG KLM67048-LM67014 bearing
31.75mm x 61.986mm x 15.875mm
FAG KM88046-M88010-XL bearing
31.75mm x 68.262mm x 22.225mm