IKO PILLOBALLs are compact self-aligning spherical bushings that can support a large radial load and a bi-directional axial load at the same time.
IKO rod ends bearing are classified by sliding surface types, namely, insert type, die-cast type and maintenance- free type. In the insert type, a spherical inner ring makes contact with the special copper alloy bushing with superior run-in properties. In the die-cast type, a spherical inner ring makes direct contact with the bore surface of the body of special zinc die-cast alloy. In the maintenance-free type, a spherical inner ring makes contact with the special PTFE liner of maintenance-free type. Thus, a smooth rotational and oscillatory motion can be achieved with superior anti-wear and loading properties in each type.
IKO PHS3 rod ends | d:3,d2:12,l4:27mm
IKO PHS3 rod ends, Lubrication type PILLOBALL rod ends insert type/with Female Thread, Dimensions: d:3mm, d2:12mm, l4:27mm.
- Brand: IKO
- d: 3 mm
- d2: 12 mm
- Height: 27 mm
- Basic dynamic load rating: 1.75 kN
- Basic static load rating: 1.75 kN
IKO PHS4 rod ends | d:4,d2:14,l4:31mm
IKO PHS4 rod ends, Lubrication type PILLOBALL rod ends insert type/with Female Thread, Dimensions: d:4mm, d2:14mm, l4:31mm.
- Brand: IKO
- d: 4 mm
- d2: 14 mm
- Height: 31 mm
- Basic dynamic load rating: 2.48 kN
- Basic static load rating: 2.48 kN
IKO PHS22 rod ends | d:22,d2:50,l4:109mm
IKO PHS22 rod ends, Lubrication type PILLOBALL rod ends insert type/with Female Thread, Dimensions: d:22mm, d2:50mm, l4:109mm.
- Brand: IKO
- d: 22 mm
- d2: 50 mm
- Height: 109 mm
- Basic dynamic load rating: 37.4 kN
- Basic static load rating: 37.4 kN
IKO PHSA16 rod ends | d:16,d2:40,l4:84mm
IKO PHSA16 rod ends, Lubrication type PILLOBALL rod ends Die-cast Type/With Female Thread, Dimensions: d:16mm, d2:40mm, l4:84mm.
- Brand: IKO
- d: 16 mm
- d2: 40 mm
- Height: 84 mm
- Basic dynamic load rating: 23.9 kN
- Basic static load rating: 23.9 kN
IKO PHSB2.5 rod ends | d:3.967,D:14.27,L:29.36mm
IKO PHSB2.5 rod ends, Inch series PILLOBALL rod ends Insert type/With Female Thread, Dimensions: d:3.967mm, D:14.27mm, L:29.36mm.
- Brand: IKO
- d: 3.967 mm
- d2: 14.27 mm
- Height: 29.36 mm
- Basic dynamic load rating: 2.6 kN
- Basic static load rating: 2.6 kN
IKO PHSB3 rod ends | d:4.826,D:15.88,L:34.93mm
IKO PHSB3 rod ends, Inch series PILLOBALL rod ends Insert type/With Female Thread, Dimensions: d:4.826mm, D:15.88mm, L:34.93mm.
- Brand: IKO
- d: 4.826 mm
- d2: 15.88 mm
- Height: 34.93 mm
- Basic dynamic load rating: 3.45 kN
- Basic static load rating: 3.45 kN
IKO PHSB4 rod ends | d:6.35,D:19.05,L:42.85mm
IKO PHSB4 rod ends, Inch series PILLOBALL rod ends Insert type/With Female Thread, Dimensions: d:6.35mm, D:19.05mm, L:42.85mm.
- Brand: IKO
- d: 6.35 mm
- d2: 19.05 mm
- Height: 42.85 mm
- Basic dynamic load rating: 4.59 kN
- Basic static load rating: 4.59 kN
IKO PHSB5 rod ends | d:7.938,D:22.23,L:46.02mm
IKO PHSB5 rod ends, Inch series PILLOBALL rod ends Insert type/With Female Thread, Dimensions: d:7.938mm, D:22.23mm, L:46.02mm.
- Brand: IKO
- d: 7.938 mm
- d2: 22.23 mm
- Height: 46.02 mm
- Basic dynamic load rating: 6.8 kN
- Basic static load rating: 6.8 kN
IKO PHSB10 rod ends | d:15.875,D:38.1,L:82.55mm
IKO PHSB10 rod ends, Inch series PILLOBALL rod ends Insert type/With Female Thread, Dimensions: d:15.875mm, D:38.1mm, L:82.55mm.
- Brand: IKO
- d: 15.875 mm
- d2: 38.1 mm
- Height: 82.55 mm
- Basic dynamic load rating: 20 kN
- Basic static load rating: 20 kN
IKO PHS12EC rod ends | d:12,d2:30,l4:65mm
IKO PHS12EC rod ends, Maintenance-free type PILLOBALL rod ends With Female Thread, Dimensions: d:12mm, d2:30mm, l4:65mm.
- Brand: IKO
- d: 12 mm
- d2: 30 mm
- Height: 65 mm
- Basic dynamic load rating: 26.2 kN
- Basic static load rating: 26.2 kN