For lubrication of the mating track, all lubricants suitable for rolling bearing lubrication may be used. However, there are applications in which the mating track must not be lubricated.

If the contact point cannot be lubricated, wear must be expected, especially under high loads and at high speeds.

Oil lubrication
For oil lubrication, oils of type CLP to DIN 51517 are recommended.

Grease lubrication
For grease lubrication, lithium soap greases to DIN 51825 should be used. Relubrication intervals can only be determined under operating conditions.

Relubrication must be carried out at the latest when fretting corrosion first occurs; it can be identified by a reddish discolouration of the mating track or the outer ring.

Solid lubricants, anti-friction coatings
These substances are suitable for lubrication. At high traverse or rotational speeds, however, they provide effective lubrication for a significantly shorter period than oil or grease lubrication.