INA YRTC580-XL bearing | 580x750x90 mm
Also known as : YRTC580-XL
- Inside Diameter: 580 mm
- Outside Diameter: 750 mm
- Width: 90 mm
- Basic dynamic load rating: 235 kN
- Basic static load rating: 730 kN
INA YRTC580-XL Bearing
INA YRTC580-XL Bearing details
Number | YRTC580-XL | |
---|---|---|
Type |
Axial/radial bearings Double direction, for screw mounting |
|
d | 580mm | Tolerance: 0/-0,025 |
D | 750mm | Tolerance: 0/-0,035 |
H | 90mm | |
46 |
Number of fixing holes in inner ring Attention! For fixing holes in the adjacent construction. Note the pitch of the bearing holes. |
|
42 |
Number of fixing holes in outer ring Attention! For fixing holes in the adjacent construction. Note the pitch of the bearing holes. |
|
2 | Number of retaining screws | |
6 | Number of extraction threads | |
a | 11mm | Fixing holes in inner ring |
C | 30mm | |
D1 max | 700mm | Diameter of inner ring for design of adjacent construction |
d1 | 11,4mm | Fixing holes in inner ring |
d2 | 18mm | Fixing holes in inner ring |
d3 | 11,4mm | Fixing holes in outer ring |
G | M12 | Extraction thread |
H1 | 60mm | |
H2 | 30mm | |
J | 610mm | Fixing holes in inner ring |
J1 | 720mm | Fixing holes in outer ring |
t | 48 x 7,5° |
Pitch t Including retaining screws and extraction threads Quantity X t |
m | 89kg | ≈ Mass |
MA | 68Nm |
Screw tightening torque Tightening torque for screws to DIN EN ISO 4762, grade 10.9. |
Ca | 580000N | Basic dynamic load rating, axial |
C0a | 4450000N | Basic static load rating, axial |
Cr | 235000N | Basic dynamic load rating, radial |
C0r | 730000N | Basic static load rating, radial |
Cur | 78000N | Fatigue limit load, radial |
Cua | 320000N | Fatigue limit load, axial |
nG | 801/min |
Limiting speed Continuous operation |
nG | 2001/min |
Limiting speed Swivel type operation, short operating duration |
MR | 60Nm | Bearing frictional torque |
caL | 11900N/µm |
Axial rigidity of bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections. |
crL | 2900N/µm |
Radial rigidity of bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections. |
ckL | 735000Nm/mrad |
Tilting rigidity of the bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections. |
caL | 41800N/µm | Axial rigidity of rolling element set |
crL | 11200N/µm | Radial rigidity of rolling element set |
ckL | 1960000Nm/mrad | Tilting rigidity of rolling element set |
As INA bearing distributor, Nodes bearings have INA YRTC580-XL rotary table bearings in stock. YRTC580-XL, Double direction, for screw mounting.