INA YRTC650-XL bearing | 650x870x122 mm
Also known as : YRTC650-XL
- Inside Diameter: 650 mm
- Outside Diameter: 870 mm
- Width: 122 mm
- Basic dynamic load rating: 455 kN
- Basic static load rating: 1300 kN
INA YRTC650-XL Bearing
INA YRTC650-XL Bearing details
Number | YRTC650-XL | |
---|---|---|
Type |
Axial/radial bearings Double direction, for screw mounting |
|
d | 650mm | Tolerance: 0/-0,038 |
D | 870mm | Tolerance: 0/-0,05 |
H | 122mm | |
46 |
Number of fixing holes in inner ring Attention! For fixing holes in the adjacent construction. Note the pitch of the bearing holes. |
|
42 |
Number of fixing holes in outer ring Attention! For fixing holes in the adjacent construction. Note the pitch of the bearing holes. |
|
2 | Number of retaining screws | |
6 | Number of extraction threads | |
a | 13mm | Fixing holes in inner ring |
C | 34mm | |
D1 max | 800mm | Diameter of inner ring for design of adjacent construction |
d1 | 14mm | Fixing holes in inner ring |
d2 | 20mm | Fixing holes in inner ring |
d3 | 14mm | Fixing holes in outer ring |
G | M12 | Extraction thread |
H1 | 78mm | |
H2 | 44mm | |
J | 680mm | Fixing holes in inner ring |
J1 | 830mm | Fixing holes in outer ring |
t | 48 x 7,5° |
Pitch t Including retaining screws and extraction threads Quantity X t |
m | 170kg | ≈ Mass |
MA | 116Nm |
Screw tightening torque Tightening torque for screws to DIN EN ISO 4762, grade 10.9. |
Ca | 910000N | Basic dynamic load rating, axial |
C0a | 6800000N | Basic static load rating, axial |
Cr | 455000N | Basic dynamic load rating, radial |
C0r | 1300000N | Basic static load rating, radial |
Cur | 136000N | Fatigue limit load, radial |
Cua | 510000N | Fatigue limit load, axial |
nG | 701/min |
Limiting speed Continuous operation |
nG | 1701/min |
Limiting speed Swivel type operation, short operating duration |
MR | 70Nm | Bearing frictional torque |
caL | 20600N/µm |
Axial rigidity of bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections. |
crL | 7300N/µm |
Radial rigidity of bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections. |
ckL | 1193000Nm/mrad |
Tilting rigidity of the bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections. |
caL | 51400N/µm | Axial rigidity of rolling element set |
crL | 8200N/µm | Radial rigidity of rolling element set |
ckL | 3554000Nm/mrad | Tilting rigidity of rolling element set |
As INA bearing distributor, Nodes bearings have INA YRTC650-XL rotary table bearings in stock. YRTC650-XL, Double direction, for screw mounting.