INA ZKLDF100 bearing | 100x185x38 mm
Also known as : ZKLDF100
- Inside Diameter: 100 mm
- Outside Diameter: 185 mm
- Width: 38 mm
- Basic dynamic load rating: 0 kN
- Basic static load rating: 0 kN
INA ZKLDF100 Bearing
INA ZKLDF100 Bearing details
Number | ZKLDF100 | |
---|---|---|
Type |
Axial angular contact ball bearings double direction, for screw mounting, sealing shields on both sides |
|
d | 100mm | Sizes d > 460 mm available by agreement |
D | 185mm | |
H | 38mm | |
16 |
Number of fixing holes in inner ring Attention! For fixing holes in the adjacent construction. Note the pitch of the bearing holes. |
|
2 | Number of retaining screws | |
15 |
Number of fixing holes in outer ring Attention! For fixing holes in the adjacent construction. Note the pitch of the bearing holes. |
|
3 | Number of extraction threads | |
a | 5,4mm | Fixing holes in inner ring |
D1 | 161mm | |
D2 | 136mm | |
D3 | 158mm | |
d1 | 5,6mm | Fixing holes in inner ring |
d2 | 10mm | Fixing holes in inner ring |
d3 | 5,6mm | Fixing holes in outer ring |
G | M5 | Extraction thread |
H1 | 25mm | |
J | 112mm | Fixing holes in inner ring |
J1 | 170mm | Fixing holes in outer ring |
t | 18 x 20 ° |
Pitch t Including retaining screws and extraction threads Quantity X t |
m | 3,8kg | ≈ Mass |
MA | 8,5Nm |
Screw tightening torque Tightening torque for screws to DIN 912, grade 10.9. |
Ca | 71000N | Basic dynamic load rating, axial |
C0a | 265000N | Basic static load rating, axial |
Cua | 10300N | Fatigue limit load, axial |
nG | 50001/min |
Limiting speed The limiting speeds increased by a factor of two are valid for bearings of the current generation with the internal suffix -B. |
caL | 1200N/µm |
Axial rigidity of bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections. |
crL | 350N/µm |
Radial rigidity of bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections. |
ckL | 3600Nm/mrad |
Tilting rigidity of the bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections. |
caL | 2200N/µm | Axial rigidity of rolling element set |
crL | 350N/µm | Radial rigidity of rolling element set |
ckL | 5000Nm/mrad | Tilting rigidity of rolling element set |
As INA bearing distributor, Nodes bearings have INA ZKLDF100 rotary table bearings in stock. ZKLDF100, double direction, for screw mounting, sealing shields on both sides.