INA ZKLF2575-2RS-XL Bearing

INA ZKLF2575-2RS-XL bearing | 25x75x28 mm

Also known as : ZKLF2575-2RS-XL

• Inside Diameter: 25 mm
• Outside Diameter: 75 mm
• Width: 28 mm
• Basic dynamic load rating: 30.5 kN
• Basic static load rating: 55 kN

Inquire Now

INA ZKLF2575-2RS-XL Bearing

Number	ZKLF2575-2RS-XL
Type	Axial angular contact ball bearings double direction, for screw mounting, lip seals on both sides
d	25mm	Tolerance: 0/-0,005
D	75mm	Tolerance: 0/-0,01
B	28mm	Tolerance: 0/-0,25
	M6	Threaded connector for lubrication
	60°	Contact angle
	M6	Fixing screws to DIN EN ISO 4762 10.9 Screws not included in scope of delivery. Tightening torque according to manufacturer’s data.
b	3mm
Da max	48mm
d1	40,5mm
d2	6,8mm
da min	32mm
I	19mm
J	58mm
naxta	4 x 90°	Fixing screws to DIN EN ISO 4762 10.9 Screws not included in scope of delivery. Tightening torque according to manufacturer’s data. Number of holes in adjacent construction corresponds to n a.
n x t	8 x 45°	Pitch
r1 min	0,6mm
rmin	0,3mm
t1	0,1mm
m	0,72kg	≈ Mass
Ca	30500N	Basic dynamic load rating, axial
C0a	55000N	Basic static load rating, axial
Cua	3350N	Fatigue limit load, axial
nG Fett	57001/min	Limiting speed for grease lubrication
nϑ	26001/min	Thermally safe operating speed
MRL	0,4Nm	Bearing frictional torque
caL	750N/µm	Axial rigidity
ckL	200Nm/mrad	Tilting rigidity
Mm	0,486kg * cm^2	Mass moment of inertia for rotating inner ring
	2µm	Axial runout The axial runout data for screw drive bearing arrangements are based on the rotating inner ring.
	ZM25	Recommended INA precision locknuts with radial clamping The recommended INA precision locknuts are not included in the scope of delivery and must be ordered separately.
	AM25	Recommended INA precision locknuts with axial clamping The recommended INA precision locknuts are not included in the scope of delivery and must be ordered separately.
MA	25Nm	Tightening torque Only valid in conjunction with INA precision locknuts. Observe the guidelines on locating/locating bearing arrangements.
	9123N	Requisite locknut force, axial The requisite axial locknut force must be observed when using other locknuts.

As INA bearing distributor, Nodes bearings have INA ZKLF2575-2RS-XL ball screw support bearings in stock. ZKLF2575-2RS-XL, Axial angular contact ball bearings.