INA ZKLF40100-2RS-XL bearing | 40x100x34 mm
Also known as : ZKLF40100-2RS-XL
- Inside Diameter: 40 mm
- Outside Diameter: 100 mm
- Width: 34 mm
- Basic dynamic load rating: 47.5 kN
- Basic static load rating: 101 kN
INA ZKLF40100-2RS-XL Bearing
INA ZKLF40100-2RS-XL Bearing details
Number | ZKLF40100-2RS-XL | |
---|---|---|
Type |
Axial angular contact ball bearings double direction, for screw mounting, lip seals on both sides |
|
d | 40mm | Tolerance: 0/-0,005 |
D | 100mm | Tolerance: 0/-0,01 |
B | 34mm | Tolerance: 0/-0,25 |
M6 | Threaded connector for lubrication | |
60° | Contact angle | |
M8 |
Fixing screws to DIN EN ISO 4762 10.9 Screws not included in scope of delivery. Tightening torque according to manufacturer’s data. |
|
b | 3mm | |
Da max | 67mm | |
d1 | 58mm | |
d2 | 8,8mm | |
da min | 50mm | |
I | 25mm | |
J | 80mm | |
naxta | 4 x 90° |
Fixing screws to DIN EN ISO 4762 10.9 Screws not included in scope of delivery. Tightening torque according to manufacturer’s data. Number of holes in adjacent construction corresponds to n a. |
n x t | 8 x 45° | Pitch |
r1 min | 0,6mm | |
rmin | 0,3mm | |
t1 | 0,2mm | |
m | 1,46kg | ≈ Mass |
Ca | 47500N | Basic dynamic load rating, axial |
C0a | 101000N | Basic static load rating, axial |
Cua | 6100N | Fatigue limit load, axial |
nG Fett | 40001/min | Limiting speed for grease lubrication |
nϑ | 18001/min | Thermally safe operating speed |
MRL | 0,7Nm | Bearing frictional torque |
caL | 1000N/µm | Axial rigidity |
ckL | 550Nm/mrad | Tilting rigidity |
Mm | 2,26kg * cm^2 | Mass moment of inertia for rotating inner ring |
2,5µm |
Axial runout The axial runout data for screw drive bearing arrangements are based on the rotating inner ring. |
|
ZM40 |
Recommended INA precision locknuts with radial clamping The recommended INA precision locknuts are not included in the scope of delivery and must be ordered separately. |
|
AM40 |
Recommended INA precision locknuts with axial clamping The recommended INA precision locknuts are not included in the scope of delivery and must be ordered separately. |
|
MA | 55Nm |
Tightening torque Only valid in conjunction with INA precision locknuts. Observe the guidelines on locating/locating bearing arrangements. |
13412N |
Requisite locknut force, axial The requisite axial locknut force must be observed when using other locknuts. |
As INA bearing distributor, Nodes bearings have INA ZKLF40100-2RS-XL ball screw support bearings in stock. ZKLF40100-2RS-XL, Axial angular contact ball bearings.