INA ZKLN0832-2RS-XL bearing | 8x32x20 mm
Also known as : ZKLN0832-2RS-XL
- Inside Diameter: 8 mm
- Outside Diameter: 32 mm
- Width: 20 mm
- Basic dynamic load rating: 13.8 kN
- Basic static load rating: 16.3 kN
INA ZKLN0832-2RS-XL Bearing
INA ZKLN0832-2RS-XL Bearing details
| Number | ZKLN0832-2RS-XL | |
|---|---|---|
| Type |
Axial angular contact ball bearings double direction, lip seals on both sides |
|
| d | 8mm | Tolerance: 0/-0,005 |
| D | 32mm | Tolerance: 0/-0,010 |
| B | 20mm | Tolerance: 0/-0,25 |
| 60° | Contact angle | |
| Da max | 26mm | |
| d1 | 19mm | |
| da min | 11mm | |
| r1 min | 0,6mm | |
| rmin | 0,3mm | |
| m | 0,09kg | ≈ Mass |
| Ca | 13800N | Basic dynamic load rating, axial |
| C0a | 16300N | Basic static load rating, axial |
| Cua | 990N | Fatigue limit load, axial |
| nG Fett | 121001/min | Limiting speed for grease lubrication |
| nϑ | 51001/min | Thermally safe operating speed |
| MRL | 0,08Nm | Bearing frictional torque |
| caL | 250N/µm | Axial rigidity |
| ckL | 20Nm/mrad | Tilting rigidity |
| Mm | 0,02kg * cm^2 | Mass moment of inertia for rotating inner ring |
| 2µm |
Axial runout The axial runout data for screw drive bearing arrangements are based on the rotating inner ring. |
|
| ZM08 |
Recommended INA precision locknuts with radial clamping The recommended INA precision locknuts are not included in the scope of delivery and must be ordered separately. |
|
| MA | 4Nm |
Tightening torque Only valid in conjunction with INA precision locknuts. Observe the guidelines on locating/locating bearing arrangements. |
| 3468N |
Requisite locknut force, axial The requisite axial locknut force must be observed when using other locknuts. |
As INA bearing distributor, Nodes bearings have INA ZKLN0832-2RS-XL ball screw support bearings in stock. ZKLN0832-2RS-XL, Axial angular contact ball bearings.
