INA ZKLN1242-2RS-XL Bearing

INA ZKLN1242-2RS-XL bearing | 12x42x25 mm

Also known as : ZKLN1242-2RS-XL

• Inside Diameter: 12 mm
• Outside Diameter: 42 mm
• Width: 25 mm
• Basic dynamic load rating: 18.6 kN
• Basic static load rating: 24.7 kN

Inquire Now

INA ZKLN1242-2RS-XL Bearing

Number	ZKLN1242-2RS-XL
Type	Axial angular contact ball bearings double direction, lip seals on both sides
d	12mm	Tolerance: 0/-0,005
D	42mm	Tolerance: 0/-0,010
B	25mm	Tolerance: 0/-0,25
	60°	Contact angle
Da max	33mm
d1	25mm
da min	16mm
r1 min	0,6mm
rmin	0,3mm
m	0,2kg	≈ Mass
Ca	18600N	Basic dynamic load rating, axial
C0a	24700N	Basic static load rating, axial
Cua	1500N	Fatigue limit load, axial
nG Fett	92001/min	Limiting speed for grease lubrication
nϑ	38001/min	Thermally safe operating speed
MRL	0,16Nm	Bearing frictional torque
caL	375N/µm	Axial rigidity
ckL	50Nm/mrad	Tilting rigidity
Mm	0,068kg * cm^2	Mass moment of inertia for rotating inner ring
	2µm	Axial runout The axial runout data for screw drive bearing arrangements are based on the rotating inner ring.
	ZM12	Recommended INA precision locknuts with radial clamping The recommended INA precision locknuts are not included in the scope of delivery and must be ordered separately.
MA	8Nm	Tightening torque Only valid in conjunction with INA precision locknuts. Observe the guidelines on locating/locating bearing arrangements.
	5307N	Requisite locknut force, axial The requisite axial locknut force must be observed when using other locknuts.

As INA bearing distributor, Nodes bearings have INA ZKLN1242-2RS-XL ball screw support bearings in stock. ZKLN1242-2RS-XL, Axial angular contact ball bearings.