INA ZKLN1747-2RS-XL Bearing

INA ZKLN1747-2RS-XL bearing | 17x47x25 mm

Also known as : ZKLN1747-2RS-XL

• Inside Diameter: 17 mm
• Outside Diameter: 47 mm
• Width: 25 mm
• Basic dynamic load rating: 20.7 kN
• Basic static load rating: 31 kN

Inquire Now

INA ZKLN1747-2RS-XL Bearing

Number	ZKLN1747-2RS-XL
Type	Axial angular contact ball bearings double direction, lip seals on both sides
d	17mm	Tolerance: 0/-0,005
D	47mm	Tolerance: 0/-0,010
B	25mm	Tolerance: 0/-0,25
	60°	Contact angle
Da max	37mm
d1	30mm
da min	23mm
r1 min	0,6mm
rmin	0,3mm
m	0,22kg	≈ Mass
Ca	20700N	Basic dynamic load rating, axial
C0a	31000N	Basic static load rating, axial
Cua	1890N	Fatigue limit load, axial
nG Fett	76001/min	Limiting speed for grease lubrication
nϑ	33001/min	Thermally safe operating speed
MRL	0,24Nm	Bearing frictional torque
caL	450N/µm	Axial rigidity
ckL	80Nm/mrad	Tilting rigidity
Mm	0,132kg * cm^2	Mass moment of inertia for rotating inner ring
	2µm	Axial runout The axial runout data for screw drive bearing arrangements are based on the rotating inner ring.
	ZM17	Recommended INA precision locknuts with radial clamping The recommended INA precision locknuts are not included in the scope of delivery and must be ordered separately.
	AM17	Recommended INA precision locknuts with axial clamping The recommended INA precision locknuts are not included in the scope of delivery and must be ordered separately.
MA	15Nm	Tightening torque Only valid in conjunction with INA precision locknuts. Observe the guidelines on locating/locating bearing arrangements.
	7514N	Requisite locknut force, axial The requisite axial locknut force must be observed when using other locknuts.

As INA bearing distributor, Nodes bearings have INA ZKLN1747-2RS-XL ball screw support bearings in stock. ZKLN1747-2RS-XL, Axial angular contact ball bearings.