INA ZKLN3062-2RS-XL Bearing

INA ZKLN3062-2RS-XL bearing | 30x62x28 mm

Also known as : ZKLN3062-2RS-XL

• Inside Diameter: 30 mm
• Outside Diameter: 62 mm
• Width: 28 mm
• Basic dynamic load rating: 32 kN
• Basic static load rating: 64 kN

Inquire Now

INA ZKLN3062-2RS-XL Bearing

Number	ZKLN3062-2RS-XL
Type	Axial angular contact ball bearings double direction, lip seals on both sides
d	30mm	Tolerance: 0/-0,005
D	62mm	Tolerance: 0/-0,010
B	28mm	Tolerance: 0/-0,25
	60°	Contact angle
Da max	53mm
d1	45,5mm
da min	40mm
r1 min	0,6mm
rmin	0,3mm
m	0,39kg	≈ Mass
Ca	32000N	Basic dynamic load rating, axial
C0a	64000N	Basic static load rating, axial
Cua	3850N	Fatigue limit load, axial
nG Fett	50001/min	Limiting speed for grease lubrication
nϑ	22001/min	Thermally safe operating speed
MRL	0,5Nm	Bearing frictional torque
caL	850N/µm	Axial rigidity
ckL	300Nm/mrad	Tilting rigidity
Mm	0,73kg * cm^2	Mass moment of inertia for rotating inner ring
	2,5µm	Axial runout The axial runout data for screw drive bearing arrangements are based on the rotating inner ring.
	ZM30	Recommended INA precision locknuts with radial clamping The recommended INA precision locknuts are not included in the scope of delivery and must be ordered separately.
	AM30	Recommended INA precision locknuts with axial clamping The recommended INA precision locknuts are not included in the scope of delivery and must be ordered separately.
MA	32Nm	Tightening torque Only valid in conjunction with INA precision locknuts. Observe the guidelines on locating/locating bearing arrangements.
	9947N	Requisite locknut force, axial The requisite axial locknut force must be observed when using other locknuts.

As INA bearing distributor, Nodes bearings have INA ZKLN3062-2RS-XL ball screw support bearings in stock. ZKLN3062-2RS-XL, Axial angular contact ball bearings.