NSK HR33030J roller bearings | 150x225x59 mm
Also known as : 33030
- Inside Diameter: 150 mm
- Outside Diameter: 225 mm
- Width: 59 mm
- Basic dynamic load rating: 435 kN
- Basic static load rating: 805 kN
NSK HR33030J Bearing
NSK HR33030J Bearing details
| model | HR33030J |
|---|---|
| d | 150 mm |
| D | 225 mm |
| T | 59 mm |
| B | 59 mm |
| C | 46 mm |
| Cone rmin. | 3 mm |
| Cup rmin. | 2.5 mm |
| Cr |
435000 N 44000 kgf |
| C0r |
805000 N 82000 kgf |
| Limiting speeds |
1400 min-1 (Grease) |
| Limiting speeds |
2000 min-1 (Oil) |
|
ISO355 Dimensions Series approx. |
2EE |
| e | 0.36 (constant) |
| y1 | 1.7 (Axial Load Factors) |
| y0 | 0.9 (Axial Load Factors) |
| Mass | 8.07 kg (approx.) |
NSK HR33030J roller bearings, tapered roller bearing, Single-Row Metric Design.
NSK HR33030J bearing cross reference
FAG 33030-XL bearing
150mm x 225mm x 59mm
FAG 33030-XL-DF-A0-35 bearing
150mm x 225mm x 118mm
NSK 32930 bearing
150mm x 210mm x 38mm
NSK HR32930J bearing
150mm x 210mm x 38mm
NSK HR32030XJ bearing
150mm x 225mm x 48mm
NSK HR30230J bearing
150mm x 270mm x 49mm
NSK HR32230J bearing
150mm x 270mm x 77mm
NSK 30330 bearing
150mm x 320mm x 72mm
NSK HR30330J bearing
150mm x 320mm x 72mm
NSK HR31330J bearing
150mm x 320mm x 82mm