TIMKEN Fafnir® RAK, TAK and LAK pillow block bearings are suggested for industrial applications where normal loads are encountered.
- Heavier than our standard TIMKEN pillow block bearings with solid, flat feet for increased strength.
- Compact, one-piece housing can be mounted in any position.
- Pillow blocks self-align at mounting with the spherical outside diameter of the TIMKEN bearing fitting into the corresponding spherical housing seat.
- Prelubricated and ready for immediate installation.
- Grease fitting for relubrication.
- Self-locking collars supplied with all units.
- RAK pillow block is equipped with G-KRRB (R-seal) wide-inner-ring ball bearings, the TAK with G-KPPB (tri-ply seal) wide-inner-ring ball bearings and the LAK with the G-KLLB (Mechani-seal) wide-inner-ring ball bearings.
Suggested shaft tolerances:
- 1/2 in. -- 1 15/16 in., nominal to -0.013 mm, -0.0005 in.;
- 2 in. -- 2 15/16 in., nominal to -0.025 mm, -0.0010 in..