TIMKEN 00050-00162X Bearing

TIMKEN 00050-00162X tapered roller bearings

Also known as : 00050-00162X

• Inside Diameter: 12.7 mm
• Outside Diameter: 41.3 mm
• Width: 13.973 mm
• Basic dynamic load rating: 20.9 kN
• Basic static load rating: 17.1 kN

Inquire Now

TIMKEN 00050-00162X Bearing

Series	00000
model	00050-00162X
Cone Part Number	00050
Cup Part Number	00162X
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	0.100 Kg 0.20 lb
Dimensions
d - Bore	12.700 mm 0.5000 in
D - Cup Outer Diameter	41.300 mm 1.6260 in
B - Cone Width	14.072 mm 0.5540 in
C - Cup Width	14.288 mm 0.5625 in
T - Bearing Width	13.973 mm 0.5501 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	1.520 mm 0.06 in
r - Cup Backface "To Clear" Radius	0.25 mm 0.010 in
da - Cone Frontface Backing Diameter	16.51 mm 0.65 in
db - Cone Backface Backing Diameter	19.05 mm 0.75 in
Da - Cup Frontface Backing Diameter	36.58 mm 1.44 in
Db - Cup Backface Backing Diameter	34.54 mm 1.36 in
Ab - Cage-Cone Frontface Clearance	2 mm 0.08 in
Aa - Cage-Cone Backface Clearance	-0.8 mm -0.03 in
a - Effective Center Location	-5.10 mm -0.20 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	5410 N 1220 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	20900 N 4690 lbf
C0 - Static Radial Rating	17100 N 3840 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	2550 N 574 lbf
Factors
K - Factor	2.12
e - ISO Factor	0.28
Y - ISO Factor	2.18
G1 - Heat Generation Factor (Roller-Raceway)	3.1
G2 - Heat Generation Factor (Rib-Roller End)	2.9
Cg - Geometry Factor	0.033

TIMKEN 00050-00162X bearings, TS (Tapered Single) Imperial, Tapered roller bearings.