TIMKEN 05070X-05185-S Bearing

TIMKEN 05070X-05185-S tapered roller bearings

Also known as : 05070X-05185-S

• Inside Diameter: 18.001 mm
• Outside Diameter: 47 mm
• Width: 14.381 mm
• Basic dynamic load rating: 24.7 kN
• Basic static load rating: 25.4 kN

Inquire Now

TIMKEN 05070X-05185-S Bearing

Series	05000
model	05070X-05185-S
Cone Part Number	05070X
Cup Part Number	05185-S
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	0.100 Kg 0.30 lb
Dimensions
d - Bore	18.001 mm 0.7087 in
D - Cup Outer Diameter	47.000 mm 1.8504 in
B - Cone Width	14.381 mm 0.5662 in
C - Cup Width	11.113 mm 0.4375 in
T - Bearing Width	14.381 mm 0.5662 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	1.520 mm 0.06 in
r - Cup Backface "To Clear" Radius	1.52 mm 0.06 in
da - Cone Frontface Backing Diameter	22.61 mm 0.89 in
db - Cone Backface Backing Diameter	24.89 mm 0.98 in
Da - Cup Frontface Backing Diameter	42.93 mm 1.69 in
Db - Cup Backface Backing Diameter	40.39 mm 1.59 in
Ab - Cage-Cone Frontface Clearance	1.27 mm 0.05 in
Aa - Cage-Cone Backface Clearance	0.25 mm 0.01 in
a - Effective Center Location	-4.10 mm -0.16 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	6420 N 1440 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	24700 N 5560 lbf
C0 - Static Radial Rating	25400 N 5720 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	3920 N 881 lbf
Factors
K - Factor	1.64
e - ISO Factor	0.36
Y - ISO Factor	1.68
G1 - Heat Generation Factor (Roller-Raceway)	5.8
G2 - Heat Generation Factor (Rib-Roller End)	5.55
Cg - Geometry Factor	0.0448

TIMKEN 05070X-05185-S bearings, TS (Tapered Single) Imperial, Tapered roller bearings.