TIMKEN 05075-05186 Bearing

TIMKEN 05075-05186 tapered roller bearings

Also known as : 05075-05186

• Inside Diameter: 19.05 mm
• Outside Diameter: 46.99 mm
• Width: 15.25 mm
• Basic dynamic load rating: 26.7 kN
• Basic static load rating: 25.4 kN

Inquire Now

TIMKEN 05075-05186 Bearing

Series	05000
model	05075-05186
Cone Part Number	05075
Cup Part Number	05186
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	0.100 Kg 0.30 lb
Dimensions
d - Bore	19.050 mm 0.7500 in
D - Cup Outer Diameter	46.990 mm 1.8500 in
B - Cone Width	14.381 mm 0.5662 in
C - Cup Width	11.999 mm 0.4724 in
T - Bearing Width	15.250 mm 0.6004 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	1.270 mm 0.050 in
r - Cup Backface "To Clear" Radius	1.52 mm 0.06 in
da - Cone Frontface Backing Diameter	23.62 mm 0.93 in
db - Cone Backface Backing Diameter	24.89 mm 0.98 in
Da - Cup Frontface Backing Diameter	42.93 mm 1.69 in
Db - Cup Backface Backing Diameter	40.39 mm 1.59 in
Ab - Cage-Cone Frontface Clearance	1.8 mm 0.07 in
Aa - Cage-Cone Backface Clearance	-0.3 mm -0.01 in
a - Effective Center Location	-4.10 mm -0.16 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	6930 N 1560 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	26700 N 6010 lbf
C0 - Static Radial Rating	25400 N 5720 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	4230 N 952 lbf
Factors
K - Factor	1.64
e - ISO Factor	0.36
Y - ISO Factor	1.68
G1 - Heat Generation Factor (Roller-Raceway)	5.8
G2 - Heat Generation Factor (Rib-Roller End)	5.5
Cg - Geometry Factor	0.0448

TIMKEN 05075-05186 bearings, TS (Tapered Single) Imperial, Tapered roller bearings.