TIMKEN 07090X-07196 Bearing

TIMKEN 07090X-07196 tapered roller bearings

Also known as : 07090X-07196

• Inside Diameter: 22.987 mm
• Outside Diameter: 50.005 mm
• Width: 13.495 mm
• Basic dynamic load rating: 27 kN
• Basic static load rating: 29.6 kN

Inquire Now

TIMKEN 07090X-07196 Bearing

Series	07000
model	07090X-07196
Cone Part Number	07090X
Cup Part Number	07196
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	0.100 Kg 0.30 lb
Dimensions
d - Bore	22.987 mm 0.9050 in
D - Cup Outer Diameter	50.005 mm 1.9687 in
B - Cone Width	14.260 mm 0.5614 in
C - Cup Width	9.525 mm 0.3750 in
T - Bearing Width	13.495 mm 0.5313 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	2.540 mm 0.1 in
r - Cup Backface "To Clear" Radius	1.02 mm 0.04 in
da - Cone Frontface Backing Diameter	27.43 mm 1.08 in
db - Cone Backface Backing Diameter	31.50 mm 1.24 in
Da - Cup Frontface Backing Diameter	47.50 mm 1.87 in
Db - Cup Backface Backing Diameter	44.45 mm 1.75 in
Ab - Cage-Cone Frontface Clearance	1.52 mm 0.06 in
Aa - Cage-Cone Backface Clearance	0.25 mm 0.01 in
a - Effective Center Location	-2.80 mm -0.11 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	6990 N 1570 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	27000 N 6060 lbf
C0 - Static Radial Rating	29600 N 6650 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	4810 N 1080 lbf
Factors
K - Factor	1.45
e - ISO Factor	0.40
Y - ISO Factor	1.49
G1 - Heat Generation Factor (Roller-Raceway)	7.6
G2 - Heat Generation Factor (Rib-Roller End)	7.1
Cg - Geometry Factor	0.0509

TIMKEN 07090X-07196 bearings, TS (Tapered Single) Imperial, Tapered roller bearings.