TIMKEN 07096-07210X Bearing

TIMKEN 07096-07210X tapered roller bearings

Also known as : 07096-07210X

• Inside Diameter: 25.159 mm
• Outside Diameter: 50.8 mm
• Width: 15.011 mm
• Basic dynamic load rating: 29.1 kN
• Basic static load rating: 29.6 kN

Inquire Now

TIMKEN 07096-07210X Bearing

Series	07000
model	07096-07210X
Cone Part Number	07096
Cup Part Number	07210X
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	0.100 Kg 0.30 lb
Dimensions
d - Bore	25.159 mm 0.9905 in
D - Cup Outer Diameter	50.8 mm 2 in
B - Cone Width	14.260 mm 0.5614 in
C - Cup Width	12.700 mm 0.5000 in
T - Bearing Width	15.011 mm 0.5910 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	1.520 mm 0.06 in
r - Cup Backface "To Clear" Radius	1.52 mm 0.06 in
da - Cone Frontface Backing Diameter	29.46 mm 1.16 in
db - Cone Backface Backing Diameter	31.50 mm 1.24 in
Da - Cup Frontface Backing Diameter	48.01 mm 1.89 in
Db - Cup Backface Backing Diameter	44.45 mm 1.75 in
Ab - Cage-Cone Frontface Clearance	2 mm 0.08 in
Aa - Cage-Cone Backface Clearance	0 mm 0 in
a - Effective Center Location	-2.80 mm -0.11 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	7550 N 1700 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	29100 N 6540 lbf
C0 - Static Radial Rating	29600 N 6650 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	5190 N 1170 lbf
Factors
K - Factor	1.45
e - ISO Factor	0.40
Y - ISO Factor	1.49
G1 - Heat Generation Factor (Roller-Raceway)	7.6
G2 - Heat Generation Factor (Rib-Roller End)	7.1
Cg - Geometry Factor	0.0509

TIMKEN 07096-07210X bearings, TS (Tapered Single) Imperial, Tapered roller bearings.