TIMKEN 09067-09194-S Bearing

TIMKEN 09067-09194-S tapered roller bearings

Also known as : 09067-09194-S

• Inside Diameter: 19.05 mm
• Outside Diameter: 52.883 mm
• Width: 18.43 mm
• Basic dynamic load rating: 42.8 kN
• Basic static load rating: 40.5 kN

Inquire Now

TIMKEN 09067-09194-S Bearing

Series	09000
model	09067-09194-S
Cone Part Number	09067
Cup Part Number	09194-S
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	0.200 Kg 0.50 lb
Dimensions
d - Bore	19.050 mm 0.7500 in
D - Cup Outer Diameter	52.883 mm 2.0820 in
B - Cone Width	19.050 mm 0.7500 in
C - Cup Width	14.684 mm 0.5781 in
T - Bearing Width	18.430 mm 0.7256 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	1.270 mm 0.050 in
r - Cup Backface "To Clear" Radius	3.30 mm 0.130 in
da - Cone Frontface Backing Diameter	23.88 mm 0.94 in
db - Cone Backface Backing Diameter	25.40 mm 1.00 in
Da - Cup Frontface Backing Diameter	46.50 mm 1.85 in
Db - Cup Backface Backing Diameter	41.91 mm 1.65 in
Ab - Cage-Cone Frontface Clearance	2 mm 0.08 in
Aa - Cage-Cone Backface Clearance	-0.3 mm -0.01 in
a - Effective Center Location	-7.40 mm -0.29 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	11100 N 2500 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	42800 N 9630 lbf
C0 - Static Radial Rating	40500 N 9100 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	5050 N 1140 lbf
Factors
K - Factor	2.2
e - ISO Factor	0.27
Y - ISO Factor	2.26
G1 - Heat Generation Factor (Roller-Raceway)	8
G2 - Heat Generation Factor (Rib-Roller End)	4.05
Cg - Geometry Factor	0.0452

TIMKEN 09067-09194-S bearings, TS (Tapered Single) Imperial, Tapered roller bearings.