TIMKEN 1351-1329 Bearing

TIMKEN 1351-1329 tapered roller bearings

Also known as : 1351-1329

• Inside Diameter: 19.05 mm
• Outside Diameter: 53.975 mm
• Width: 23.18 mm
• Basic dynamic load rating: 47.9 kN
• Basic static load rating: 48.3 kN

Inquire Now

TIMKEN 1351-1329 Bearing

Series	1300
model	1351-1329
Cone Part Number	1351
Cup Part Number	1329
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	0.300 Kg 0.60 lb
Dimensions
d - Bore	19.050 mm 0.7500 in
D - Cup Outer Diameter	53.975 mm 2.1250 in
B - Cone Width	23.978 mm 0.9440 in
C - Cup Width	14.288 mm 0.5625 in
T - Bearing Width	23.180 mm 0.9126 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	2.790 mm 0.110 in
r - Cup Backface "To Clear" Radius	1.52 mm 0.06 in
da - Cone Frontface Backing Diameter	24.89 mm 0.98 in
db - Cone Backface Backing Diameter	29.46 mm 1.16 in
Da - Cup Frontface Backing Diameter	49.53 mm 1.95 in
Db - Cup Backface Backing Diameter	45.97 mm 1.81 in
Ab - Cage-Cone Frontface Clearance	1.8 mm 0.07 in
Aa - Cage-Cone Backface Clearance	4.6 mm 0.18 in
a - Effective Center Location	-11.4 mm -0.45 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	12400 N 2790 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	47900 N 10800 lbf
C0 - Static Radial Rating	48300 N 10900 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	6200 N 1390 lbf
Factors
K - Factor	2
e - ISO Factor	0.29
Y - ISO Factor	2.05
G1 - Heat Generation Factor (Roller-Raceway)	10.3
G2 - Heat Generation Factor (Rib-Roller End)	5.2
Cg - Geometry Factor	0.0508

TIMKEN 1351-1329 bearings, TS (Tapered Single) Imperial, Tapered roller bearings.