TIMKEN 14120A-14273 Bearing

TIMKEN 14120A-14273 tapered roller bearings

Also known as : 14120A-14273

• Inside Diameter: 30 mm
• Outside Diameter: 69.012 mm
• Width: 26.474 mm
• Basic dynamic load rating: 54.6 kN
• Basic static load rating: 61.7 kN

Inquire Now

TIMKEN 14120A-14273 Bearing

Series	14000
model	14120A-14273
Cone Part Number	14120A
Cup Part Number	14273
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	0.400 Kg 0.80 lb
Dimensions
d - Bore	30 mm 1.1811 in
D - Cup Outer Diameter	69.012 mm 2.7170 in
B - Cone Width	26.721 mm 1.0520 in
C - Cup Width	16.955 mm 0.6675 in
T - Bearing Width	26.474 mm 1.0423 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	3.560 mm 0.14 in
r - Cup Backface "To Clear" Radius	0.00 mm 0.000 in
da - Cone Frontface Backing Diameter	36.58 mm 1.44 in
db - Cone Backface Backing Diameter	42.42 mm 1.67 in
Da - Cup Frontface Backing Diameter	63.00 mm 2.52 in
Db - Cup Backface Backing Diameter	55.88 mm 2.20 in
Ab - Cage-Cone Frontface Clearance	1.8 mm 0.07 in
Aa - Cage-Cone Backface Clearance	7.9 mm 0.31 in
a - Effective Center Location	-11.4 mm -0.45 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	14200 N 3180 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	54600 N 12300 lbf
C0 - Static Radial Rating	61700 N 13900 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	9260 N 2080 lbf
Factors
K - Factor	1.53
e - ISO Factor	0.38
Y - ISO Factor	1.57
G1 - Heat Generation Factor (Roller-Raceway)	18
G2 - Heat Generation Factor (Rib-Roller End)	13.3
Cg - Geometry Factor	0.0668

TIMKEN 14120A-14273 bearings, TS (Tapered Single) Imperial, Tapered roller bearings.