TIMKEN 14125A-14282 Bearing

TIMKEN 14125A-14282 tapered roller bearings

Also known as : 14125A-14282

• Inside Diameter: 31.75 mm
• Outside Diameter: 71.996 mm
• Width: 19.002 mm
• Basic dynamic load rating: 54.6 kN
• Basic static load rating: 61.7 kN

Inquire Now

TIMKEN 14125A-14282 Bearing

Series	14000
model	14125A-14282
Cone Part Number	14125A
Cup Part Number	14282
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	0.400 Kg 0.80 lb
Dimensions
d - Bore	31.750 mm 1.2500 in
D - Cup Outer Diameter	71.996 mm 2.8345 in
B - Cone Width	19.583 mm 0.7710 in
C - Cup Width	15.032 mm 0.5918 in
T - Bearing Width	19.002 mm 0.7481 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	3.560 mm 0.14 in
r - Cup Backface "To Clear" Radius	1.52 mm 0.06 in
da - Cone Frontface Backing Diameter	38.61 mm 1.52 in
db - Cone Backface Backing Diameter	44.45 mm 1.75 in
Da - Cup Frontface Backing Diameter	66.00 mm 2.60 in
Db - Cup Backface Backing Diameter	61.98 mm 2.44 in
Ab - Cage-Cone Frontface Clearance	1.8 mm 0.07 in
Aa - Cage-Cone Backface Clearance	0.5 mm 0.02 in
a - Effective Center Location	-4.30 mm -0.17 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	14200 N 3180 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	54600 N 12300 lbf
C0 - Static Radial Rating	61700 N 13900 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	9260 N 2080 lbf
Factors
K - Factor	1.53
e - ISO Factor	0.38
Y - ISO Factor	1.57
G1 - Heat Generation Factor (Roller-Raceway)	18
G2 - Heat Generation Factor (Rib-Roller End)	13.3
Cg - Geometry Factor	0.0668

TIMKEN 14125A-14282 bearings, TS (Tapered Single) Imperial, Tapered roller bearings.