TIMKEN 1755-1738X Bearing

TIMKEN 1755-1738X tapered roller bearings

Also known as : 1755-1738X

  • Inside Diameter: 22.225 mm
  • Outside Diameter: 57.15 mm
  • Width: 20.221 mm
  • Basic dynamic load rating: 45.4 kN
  • Basic static load rating: 45.3 kN

Inquire Now


TIMKEN 1755-1738X Bearing

TIMKEN 1755-1738X Bearing details

Series 1700
model 1755-1738X
Cone Part Number 1755
Cup Part Number 1738X
Design Units Imperial
Cage Type Stamped Steel
Bearing Weight 0.300 Kg
0.60 lb
Dimensions
d - Bore 22.225 mm
0.8750 in
D - Cup Outer Diameter 57.150 mm
2.2500 in
B - Cone Width 19.837 mm
0.7810 in
C - Cup Width 17.551 mm
0.6910 in
T - Bearing Width 20.221 mm
0.7961 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius 1.270 mm
0.050 in
r - Cup Backface "To Clear" Radius 2.29 mm
0.090 in
da - Cone Frontface Backing Diameter 27.43 mm
1.08 in
db - Cone Backface Backing Diameter 28.96 mm
1.14 in
Da - Cup Frontface Backing Diameter 51.10 mm
2.05 in
Db - Cup Backface Backing Diameter 48.51 mm
1.91 in
Ab - Cage-Cone Frontface Clearance 2 mm
0.08 in
Aa - Cage-Cone Backface Clearance 0.3 mm
0.01 in
a - Effective Center Location -6.9 mm
-0.27 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions) 11800 N
2650 lbf
C1 - Dynamic Radial Rating (1 million revolutions) 45400 N
10200 lbf
C0 - Static Radial Rating 45300 N
10200 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions) 6200 N
1390 lbf
Factors
K - Factor 1.9
e - ISO Factor 0.31
Y - ISO Factor 1.95
G1 - Heat Generation Factor (Roller-Raceway) 10.6
G2 - Heat Generation Factor (Rib-Roller End) 5.4
Cg - Geometry Factor 0.0521

TIMKEN 1755-1738X bearings, TS (Tapered Single) Imperial, Tapered roller bearings.

TIMKEN bearing cross reference

TIMKEN 1755-1730 bearing
22.225mm x 53.975mm x 19.368mm
TIMKEN 1755-1729 bearing
22.225mm x 56.896mm x 19.368mm
TIMKEN 1755-1729X bearing
22.225mm x 56.896mm x 19.368mm
TIMKEN 1755-1729-B bearing
22.225mm x 56.896mm x 7.463mm