TIMKEN 1994X-1932 Bearing

TIMKEN 1994X-1932 tapered roller bearings

Also known as : 1994X-1932

• Inside Diameter: 25.4 mm
• Outside Diameter: 58.738 mm
• Width: 19.053 mm
• Basic dynamic load rating: 48.4 kN
• Basic static load rating: 50.2 kN

Inquire Now

TIMKEN 1994X-1932 Bearing

Series	1900
model	1994X-1932
Cone Part Number	1994X
Cup Part Number	1932
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	0.200 Kg 0.50 lb
Dimensions
d - Bore	25.400 mm 1.0000 in
D - Cup Outer Diameter	58.738 mm 2.3125 in
B - Cone Width	19.355 mm 0.7620 in
C - Cup Width	15.080 mm 0.5937 in
T - Bearing Width	19.053 mm 0.7501 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	3.560 mm 0.14 in
r - Cup Backface "To Clear" Radius	1.27 mm 0.050 in
da - Cone Frontface Backing Diameter	30.48 mm 1.20 in
db - Cone Backface Backing Diameter	37.08 mm 1.46 in
Da - Cup Frontface Backing Diameter	55.10 mm 2.17 in
Db - Cup Backface Backing Diameter	52.07 mm 2.05 in
Ab - Cage-Cone Frontface Clearance	2 mm 0.08 in
Aa - Cage-Cone Backface Clearance	0 mm 0 in
a - Effective Center Location	-5.80 mm -0.23 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	12500 N 2820 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	48400 N 10900 lbf
C0 - Static Radial Rating	50200 N 11300 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	7080 N 1590 lbf
Factors
K - Factor	1.77
e - ISO Factor	0.33
Y - ISO Factor	1.82
G1 - Heat Generation Factor (Roller-Raceway)	12.5
G2 - Heat Generation Factor (Rib-Roller End)	6.3
Cg - Geometry Factor	0.0565

TIMKEN 1994X-1932 bearings, TS (Tapered Single) Imperial, Tapered roller bearings.