TIMKEN 23092-23256 Bearing

TIMKEN 23092-23256 tapered roller bearings

Also known as : 23092-23256

• Inside Diameter: 23.813 mm
• Outside Diameter: 65.088 mm
• Width: 22.225 mm
• Basic dynamic load rating: 54.6 kN
• Basic static load rating: 55.8 kN

Inquire Now

TIMKEN 23092-23256 Bearing

Series	23000
model	23092-23256
Cone Part Number	23092
Cup Part Number	23256
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	0.400 Kg 0.80 lb
Dimensions
d - Bore	23.813 mm 0.9375 in
D - Cup Outer Diameter	65.088 mm 2.5625 in
B - Cone Width	21.463 mm 0.8450 in
C - Cup Width	15.875 mm 0.6250 in
T - Bearing Width	22.225 mm 0.8750 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	1.520 mm 0.06 in
r - Cup Backface "To Clear" Radius	1.52 mm 0.06 in
da - Cone Frontface Backing Diameter	34.54 mm 1.36 in
db - Cone Backface Backing Diameter	38.61 mm 1.52 in
Da - Cup Frontface Backing Diameter	63.00 mm 2.52 in
Db - Cup Backface Backing Diameter	53.09 mm 2.09 in
Ab - Cage-Cone Frontface Clearance	2.5 mm 0.1 in
Aa - Cage-Cone Backface Clearance	3 mm 0.12 in
a - Effective Center Location	-2.30 mm -0.09 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	14200 N 3180 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	54600 N 12300 lbf
C0 - Static Radial Rating	55800 N 12500 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	17700 N 3990 lbf
Factors
K - Factor	0.8
e - ISO Factor	0.73
Y - ISO Factor	0.82
G1 - Heat Generation Factor (Roller-Raceway)	11.3
G2 - Heat Generation Factor (Rib-Roller End)	6.57
Cg - Geometry Factor	0.07

TIMKEN 23092-23256 bearings, TS (Tapered Single) Imperial, Tapered roller bearings.