TIMKEN 24112-24261 Bearing

TIMKEN 24112-24261 tapered roller bearings

Also known as : 24112-24261

• Inside Diameter: 28.575 mm
• Outside Diameter: 66.421 mm
• Width: 19.05 mm
• Basic dynamic load rating: 55.9 kN
• Basic static load rating: 55.2 kN

Inquire Now

TIMKEN 24112-24261 Bearing

Series	24000
model	24112-24261
Cone Part Number	24112
Cup Part Number	24261
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	0.300 Kg 0.70 lb
Dimensions
d - Bore	28.575 mm 1.1250 in
D - Cup Outer Diameter	66.421 mm 2.6150 in
B - Cone Width	18.974 mm 0.7470 in
C - Cup Width	15.875 mm 0.6250 in
T - Bearing Width	19.050 mm 0.7500 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	1.520 mm 0.06 in
r - Cup Backface "To Clear" Radius	1.52 mm 0.06 in
da - Cone Frontface Backing Diameter	34.04 mm 1.34 in
db - Cone Backface Backing Diameter	36.07 mm 1.42 in
Da - Cup Frontface Backing Diameter	61.00 mm 2.44 in
Db - Cup Backface Backing Diameter	57.91 mm 2.28 in
Ab - Cage-Cone Frontface Clearance	2.3 mm 0.09 in
Aa - Cage-Cone Backface Clearance	0 mm 0 in
a - Effective Center Location	-4.80 mm -0.19 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	14500 N 3260 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	55900 N 12600 lbf
C0 - Static Radial Rating	55200 N 12400 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	8420 N 1890 lbf
Factors
K - Factor	1.72
e - ISO Factor	0.34
Y - ISO Factor	1.77
G1 - Heat Generation Factor (Roller-Raceway)	14
G2 - Heat Generation Factor (Rib-Roller End)	8.28
Cg - Geometry Factor	0.0589

TIMKEN 24112-24261 bearings, TS (Tapered Single) Imperial, Tapered roller bearings.