TIMKEN 2584-2530 Bearing

TIMKEN 2584-2530 tapered roller bearings

Also known as : 2584-2530

• Inside Diameter: 32.532 mm
• Outside Diameter: 66.421 mm
• Width: 26.988 mm
• Basic dynamic load rating: 83.7 kN
• Basic static load rating: 94.4 kN

Inquire Now

TIMKEN 2584-2530 Bearing

Series	2500
model	2584-2530
Cone Part Number	2584
Cup Part Number	2530
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	0.400 Kg 0.90 lb
Dimensions
d - Bore	32.532 mm 1.2808 in
D - Cup Outer Diameter	66.421 mm 2.6150 in
B - Cone Width	26.944 mm 1.0608 in
C - Cup Width	20.638 mm 0.8125 in
T - Bearing Width	26.988 mm 1.0625 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	5.080 mm 0.2 in
r - Cup Backface "To Clear" Radius	0.76 mm 0.030 in
da - Cone Frontface Backing Diameter	38.10 mm 1.50 in
db - Cone Backface Backing Diameter	47.50 mm 1.87 in
Da - Cup Frontface Backing Diameter	62.99 mm 2.48 in
Db - Cup Backface Backing Diameter	59.94 mm 2.36 in
Ab - Cage-Cone Frontface Clearance	1.5 mm 0.06 in
Aa - Cage-Cone Backface Clearance	2 mm 0.08 in
a - Effective Center Location	-10.2 mm -0.4 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	21700 N 4880 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	83700 N 18800 lbf
C0 - Static Radial Rating	94400 N 21200 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	10200 N 2280 lbf
Factors
K - Factor	2.14
e - ISO Factor	0.27
Y - ISO Factor	2.19
G1 - Heat Generation Factor (Roller-Raceway)	23.6
G2 - Heat Generation Factor (Rib-Roller End)	9.6
Cg - Geometry Factor	0.0656

TIMKEN 2584-2530 bearings, TS (Tapered Single) Imperial, Tapered roller bearings.