TIMKEN 334-332US Bearing

TIMKEN 334-332US tapered roller bearings

Also known as : 334-332US

• Inside Diameter: 30.163 mm
• Outside Diameter: 80 mm
• Width: 20.998 mm
• Basic dynamic load rating: 79.5 kN
• Basic static load rating: 83.4 kN

Inquire Now

TIMKEN 334-332US Bearing

Series	335
model	334-332US
Cone Part Number	334
Cup Part Number	332US
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	0.600 Kg 1.30 lb
Dimensions
d - Bore	30.163 mm 1.1875 in
D - Cup Outer Diameter	80 mm 3.1496 in
B - Cone Width	22.403 mm 0.8820 in
C - Cup Width	17.826 mm 0.7018 in
T - Bearing Width	20.998 mm 0.8267 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	0.760 mm 0.03 in
r - Cup Backface "To Clear" Radius	2.03 mm 0.08 in
da - Cone Frontface Backing Diameter	38.10 mm 1.50 in
db - Cone Backface Backing Diameter	39.12 mm 1.54 in
Da - Cup Frontface Backing Diameter	75.90 mm 2.99 in
Db - Cup Backface Backing Diameter	71.88 mm 2.83 in
Ab - Cage-Cone Frontface Clearance	1.8 mm 0.07 in
Aa - Cage-Cone Backface Clearance	0 mm 0 in
a - Effective Center Location	-6.40 mm -0.25 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	20600 N 4640 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	79500 N 17900 lbf
C0 - Static Radial Rating	83400 N 18700 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	9640 N 2170 lbf
Factors
K - Factor	2.14
e - ISO Factor	0.27
Y - ISO Factor	2.2
G1 - Heat Generation Factor (Roller-Raceway)	26.5
G2 - Heat Generation Factor (Rib-Roller End)	13
Cg - Geometry Factor	0.0676

TIMKEN 334-332US bearings, TS (Tapered Single) Imperial, Tapered roller bearings.