TIMKEN 3474-3431 Bearing

TIMKEN 3474-3431 tapered roller bearings

Also known as : 3474-3431

• Inside Diameter: 30.163 mm
• Outside Diameter: 82.55 mm
• Width: 29.37 mm
• Basic dynamic load rating: 105 kN
• Basic static load rating: 119 kN

Inquire Now

TIMKEN 3474-3431 Bearing

Series	3400
model	3474-3431
Cone Part Number	3474
Cup Part Number	3431
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	0.800 Kg 1.80 lb
Dimensions
d - Bore	30.163 mm 1.1875 in
D - Cup Outer Diameter	82.550 mm 3.2500 in
B - Cone Width	29.771 mm 1.1721 in
C - Cup Width	23.813 mm 0.9375 in
T - Bearing Width	29.370 mm 1.1563 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	0.760 mm 0.03 in
r - Cup Backface "To Clear" Radius	3.30 mm 0.130 in
da - Cone Frontface Backing Diameter	39.88 mm 1.57 in
db - Cone Backface Backing Diameter	40.89 mm 1.61 in
Da - Cup Frontface Backing Diameter	75.90 mm 2.99 in
Db - Cup Backface Backing Diameter	69.09 mm 2.72 in
Ab - Cage-Cone Frontface Clearance	1.3 mm 0.05 in
Aa - Cage-Cone Backface Clearance	1 mm 0.04 in
a - Effective Center Location	-8.60 mm -0.34 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	27100 N 6100 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	105000 N 23500 lbf
C0 - Static Radial Rating	119000 N 26800 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	17000 N 3820 lbf
Factors
K - Factor	1.6
e - ISO Factor	0.37
Y - ISO Factor	1.64
G1 - Heat Generation Factor (Roller-Raceway)	29.9
G2 - Heat Generation Factor (Rib-Roller End)	11.2
Cg - Geometry Factor	0.0781

TIMKEN 3474-3431 bearings, TS (Tapered Single) Imperial, Tapered roller bearings.