TIMKEN 43096-43326 Bearing

TIMKEN 43096-43326 tapered roller bearings

Also known as : 43096-43326

• Inside Diameter: 24.384 mm
• Outside Diameter: 82.55 mm
• Width: 25.4 mm
• Basic dynamic load rating: 92 kN
• Basic static load rating: 76.2 kN

Inquire Now

TIMKEN 43096-43326 Bearing

Series	43000
model	43096-43326
Cone Part Number	43096
Cup Part Number	43326
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	0.700 Kg 1.50 lb
Dimensions
d - Bore	24.384 mm 0.9600 in
D - Cup Outer Diameter	82.550 mm 3.2500 in
B - Cone Width	24.074 mm 0.9478 in
C - Cup Width	17.463 mm 0.6875 in
T - Bearing Width	25.400 mm 1.0000 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	0.760 mm 0.03 in
r - Cup Backface "To Clear" Radius	1.52 mm 0.06 in
da - Cone Frontface Backing Diameter	39.62 mm 1.56 in
db - Cone Backface Backing Diameter	40.39 mm 1.59 in
Da - Cup Frontface Backing Diameter	76.96 mm 3.03 in
Db - Cup Backface Backing Diameter	68.07 mm 2.68 in
Ab - Cage-Cone Frontface Clearance	3.3 mm 0.13 in
Aa - Cage-Cone Backface Clearance	2.5 mm 0.1 in
a - Effective Center Location	-2.00 mm -0.08 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	23900 N 5360 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	92000 N 20700 lbf
C0 - Static Radial Rating	76200 N 17100 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	27300 N 6130 lbf
Factors
K - Factor	0.87
e - ISO Factor	0.67
Y - ISO Factor	0.9
G1 - Heat Generation Factor (Roller-Raceway)	16.8
G2 - Heat Generation Factor (Rib-Roller End)	7.6
Cg - Geometry Factor	0.0774

TIMKEN 43096-43326 bearings, TS (Tapered Single) Imperial, Tapered roller bearings.