TIMKEN 44126-44348 Bearing

TIMKEN 44126-44348 tapered roller bearings

Also known as : 44126-44348

  • Inside Diameter: 31.75 mm
  • Outside Diameter: 88.501 mm
  • Width: 25.4 mm
  • Basic dynamic load rating: 84.2 kN
  • Basic static load rating: 88.6 kN

Inquire Now


TIMKEN 44126-44348 Bearing

TIMKEN 44126-44348 Bearing details

Series 44000
model 44126-44348
Cone Part Number 44126
Cup Part Number 44348
Design Units Imperial
Cage Type Stamped Steel
Bearing Weight 0.800 Kg
1.70 lb
Dimensions
d - Bore 31.750 mm
1.2500 in
D - Cup Outer Diameter 88.501 mm
3.4843 in
B - Cone Width 23.698 mm
0.9330 in
C - Cup Width 17.463 mm
0.6875 in
T - Bearing Width 25.400 mm
1.0000 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius 1.520 mm
0.06 in
r - Cup Backface "To Clear" Radius 1.52 mm
0.06 in
da - Cone Frontface Backing Diameter 46.48 mm
1.83 in
db - Cone Backface Backing Diameter 49.02 mm
1.93 in
Da - Cup Frontface Backing Diameter 84.10 mm
3.34 in
Db - Cup Backface Backing Diameter 74.93 mm
2.95 in
Ab - Cage-Cone Frontface Clearance 3.8 mm
0.15 in
Aa - Cage-Cone Backface Clearance 3 mm
0.12 in
a - Effective Center Location 2.30 mm
0.09 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions) 21800 N
4910 lbf
C1 - Dynamic Radial Rating (1 million revolutions) 84200 N
18900 lbf
C0 - Static Radial Rating 88600 N
19900 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions) 29200 N
6560 lbf
Factors
K - Factor 0.75
e - ISO Factor 0.78
Y - ISO Factor 0.77
G1 - Heat Generation Factor (Roller-Raceway) 22.9
G2 - Heat Generation Factor (Rib-Roller End) 8.7
Cg - Geometry Factor 0.0899

TIMKEN 44126-44348 bearings, TS (Tapered Single) Imperial, Tapered roller bearings.