TIMKEN 4C-6 Bearing

TIMKEN 4C-6 tapered roller bearings

Also known as : 4C-6

• Inside Diameter: 17.463 mm
• Outside Diameter: 44.45 mm
• Width: 12.7 mm
• Basic dynamic load rating: 20.3 kN
• Basic static load rating: 20.6 kN

Inquire Now

TIMKEN 4C-6 Bearing

Series	5C
model	4C-6
Cone Part Number	4C
Cup Part Number	6
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	0.100 Kg 0.20 lb
Dimensions
d - Bore	17.463 mm 0.6875 in
D - Cup Outer Diameter	44.450 mm 1.7500 in
B - Cone Width	11.908 mm 0.4688 in
C - Cup Width	9.525 mm 0.3750 in
T - Bearing Width	12.700 mm 0.5000 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	1.520 mm 0.06 in
r - Cup Backface "To Clear" Radius	1.52 mm 0.06 in
da - Cone Frontface Backing Diameter	22.10 mm 0.87 in
db - Cone Backface Backing Diameter	24.38 mm 0.96 in
Da - Cup Frontface Backing Diameter	41.40 mm 1.63 in
Db - Cup Backface Backing Diameter	38.10 mm 1.50 in
Ab - Cage-Cone Frontface Clearance	2.3 mm 0.09 in
Aa - Cage-Cone Backface Clearance	0.3 mm 0.01 in
a - Effective Center Location	-1.8 mm -0.07 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	5250 N 1180 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	20300 N 4550 lbf
C0 - Static Radial Rating	20600 N 4640 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	4310 N 969 lbf
Factors
K - Factor	1.22
e - ISO Factor	0.48
Y - ISO Factor	1.25
G1 - Heat Generation Factor (Roller-Raceway)	4.6
G2 - Heat Generation Factor (Rib-Roller End)	2.61
Cg - Geometry Factor	0.0456

TIMKEN 4C-6 bearings, TS (Tapered Single) Imperial, Tapered roller bearings.