TIMKEN A5069-A5144 Bearing

TIMKEN A5069-A5144 tapered roller bearings

Also known as : A5069-A5144

• Inside Diameter: 17.455 mm
• Outside Diameter: 36.525 mm
• Width: 11.113 mm
• Basic dynamic load rating: 13 kN
• Basic static load rating: 11.6 kN

Inquire Now

TIMKEN A5069-A5144 Bearing

Series	A5000
model	A5069-A5144
Cone Part Number	A5069
Cup Part Number	A5144
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	0.100 Kg 0.10 lb
Dimensions
d - Bore	17.455 mm 0.6872 in
D - Cup Outer Diameter	36.525 mm 1.4380 in
B - Cone Width	11.113 mm 0.4375 in
C - Cup Width	7.938 mm 0.3125 in
T - Bearing Width	11.113 mm 0.4375 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	1.520 mm 0.06 in
r - Cup Backface "To Clear" Radius	1.52 mm 0.06 in
da - Cone Frontface Backing Diameter	21.34 mm 0.84 in
db - Cone Backface Backing Diameter	23.62 mm 0.93 in
Da - Cup Frontface Backing Diameter	34.00 mm 1.34 in
Db - Cup Backface Backing Diameter	29.97 mm 1.18 in
Ab - Cage-Cone Frontface Clearance	2 mm 0.08 in
Aa - Cage-Cone Backface Clearance	-0.5 mm -0.02 in
a - Effective Center Location	-2.00 mm -0.08 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	3380 N 760 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	13000 N 2930 lbf
C0 - Static Radial Rating	11600 N 2600 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	2820 N 634 lbf
Factors
K - Factor	1.2
e - ISO Factor	0.49
Y - ISO Factor	1.23
G1 - Heat Generation Factor (Roller-Raceway)	2.5
G2 - Heat Generation Factor (Rib-Roller End)	4.61
Cg - Geometry Factor	0.0376

TIMKEN A5069-A5144 bearings, TS (Tapered Single) Imperial, Tapered roller bearings.